V = ir
v = (0.5)(250)
v = 125
Voltage = (current) x (resistance) Current = (voltage)/(resistance) Resistance = (voltage)/(current)
1). Voltage = (resistance) x (current)2). Current = (voltage) / (resistance)3). Resistance = (voltage) / (current)I think #2 is Ohm's original statement, but any one of these can be massaged algebraicallyin order to derive the other two.
Ohm's Law: Current = Voltage times resistance, hence current is directly proportional to voltage.
V=IR, voltage is directly propostional to current and resistance (by ohm's law).CommentVoltage is not 'proportional to resistance'. Resistance is a constant, and is not affected by voltage at all.
Ohm's Law states Voltage = Current x Resistance. Hence if voltage is increased and resistance is constant, current will increase proportionally to the rise in voltage.
because there is no voltage and resistance?
The higher the resistance the dimmer the light will become. The voltage drop (current) is proportional to the resistance as seen in the equation V=IR, since voltage remains the same throughout a series circuit if the equivalent resistance goes up the amount of current reaching the lightbulb must go down to equal the voltage thus creating a dimmer lightbulb.
Voltage = (current) x (resistance) Current = (voltage)/(resistance) Resistance = (voltage)/(current)
Voltage = (current) x (resistance) Current = (voltage)/(resistance) Resistance = (voltage)/(current)
Voltage = (current) x (resistance) Current = (voltage)/(resistance) Resistance = (voltage)/(current)
The voltage of a circuit with a resistance of 250 ohms and a current of 0.95 amps is 237.5 volts. Ohms's law: Voltage = Current times Resistance
Voltage across a resistance = (resistance) x (current through the resistance) =4 x 1.4 = 5.6If the ' 1.4 ' is Amperes of current, then the required voltage is 5.6 volts.
Voltage = Current x Resistance giving us Current = Voltage / Resistance i.e. Voltage divided by resistance
32v
No. Voltage divided by resistance is equal to current.
Voltage = Current * Resistance (Ohm's law)
if current and resistance are know are known then voltage can be calculated using OHMS LAW V=I*R 2*16= 32 Volt