Ohm's Law: Current = Voltage times resistance, hence current is directly proportional to voltage.
Current is directly proportional to applied voltage. Ohm's law.
V=IR, voltage is directly propostional to current and resistance (by ohm's law).CommentVoltage is not 'proportional to resistance'. Resistance is a constant, and is not affected by voltage at all.
Ohm's law states that "The current is directly proportional to the applied EMF (voltage) and inversely proportional to the resistance in the circuit." <<>> if resistor exists, resistance decreases according to ohm's law, current is directly proportional to voltage and current is inversely proportional to resistance it means as current increases, voltage increases. resistance increases, current decreases so as voltage if there is no resistor, there should be no resistance except internal resistance of voltmeter and ammeter
The induced current is proportional to applied voltage. i is proportional to v Or you might say, "A current source drives a fixed current through a circuit. Then the voltage developed is proportional to i" . Both forms are equally correct. Voltage sources are more common than current sources so the first form is more common.
Current is proportional to the potential difference and inversely proportional to resistance. Ohm's law: Current equals voltage divided by resistance
voltage is inversly proportional to speed speed and current are directly proportional to each other but voltage and current are directly proportional to each other..
Current is directly proportional to applied voltage. Ohm's law.
The statement current is directly proportional to voltage and inversely proportional to resistance is known as Ohm's Law.
Current and voltage are directly proportional according to Ohm's Law. This means that as voltage increases, current increases proportionally, and as voltage decreases, current decreases proportionally. Mathematically, this relationship is expressed as I = V/R, where I is current, V is voltage, and R is resistance.
The current is directly proportional to the voltage applied across a circuit, according to Ohm's Law (I = V/R), where I is the current, V is the voltage, and R is the resistance.
Voltage is directly proportional to current, meaning that as voltage increases, current also increases and vice versa, as per Ohm's Law. However, voltage is inversely proportional to resistance, meaning that as voltage increases, resistance decreases and vice versa.
Yes and no. Voltage is directly proportional to current from Ohm's Law (V=IR.) Thus, when voltage increases, so does current. However, voltage can be inversely proportional to current in some situations. This can be seen in a transformer, where current and voltage are inversely proportional due to the law of conservation of energy, in which P(in) must equal P(out). Thus, a greater input voltage leads to a small output current.
Yes, due to ohms law. Current, resistance and voltage are all directly proportional. V=IR; I=V/R; & R=V/I
According to ohms law I=V/R; So current is directly proportional to voltage
Ohm's Law: V = I*R, so Voltage and Current are directly proportional and a change in voltage will result in a proportional change in current. (The current reduces by the same factor)
There is an inverse proportion between voltage and resistance according to Ohm's Law: V = IR, where V is voltage, I is current, and R is resistance. This means that as resistance increases, the voltage across the circuit decreases, and vice versa.
Ohm's Law: voltage = current * resistance. If resistance is a constant, then voltage is directly proportional to current.