BOPBD ? Are you talking about the yellow light of death when you try to start the ps3 it starts then shuts off and blinks yellow. If so then your CPU over heated and melted solder around creating one or multiple soldering bridges you can spend like 80$ or so and send it to ps3 and have them fix it but i would not recommend last time i did that i lost all my save files ect. and they gave me brand new ps3 in box. You can do it your self easy i have done that 2ce now just have to take ps3 apart and if you know the basics of soldering its very simple to unsolder it to make it work. There are videos on YouTube step by step on how to do it very easy
The power supply is probably defective. If it isn't a year old, they will fix or replace it at no charge.
on the ps3 you can do it by beating level 22
All you have to do is hold down the power button for 5-10 sec and the ps3 will default back to factory setting.
The network is down and the related question has all available information
You don't fix it you replace it if it does not just need the controller setting adjusted under ps3 setting. If the other dual shock 3 controllers work fine it is not the settings
It sounds like you have BOPBD (burned out ps3 blu ray drive). A problem common to all ps3 slim and fat users. Or it could be that your ps3 blu ray lens is dirty. If it is dirty there are some youtube videos witch show you how to open your ps3 and clean it. If cleaning the blu ray lens doesnt work youve got BOPBD. Nothing you can do other than check your warranty and have someone fix it for you or buy a new one and watch a youtube vid. on how to replace it yourself.
sell it and buy a ps3
yes
Take it to a shop
Start my making sure it is charged and connected to the PS3 by using the cable that comes with the PS3
The lens/laser could be broken.
I dont know how to fix it so you guys are screwed
Fixing the YLOD on the PS3 will cost $150.00.
Elite System Performance
take it in for service at a SONY shop
I am not connect to the ps3
With tools obviously!