The formula you are looking for is Watts = Amps x Volts. killo = 1000 1 kw = 1000 watts.
Horsepower is a unit of power (weight over distance) and speed is a measurement of velocity (rate of movement).
Yes current = charge / time = I = Q/t
V=IRR changes as a result of the change in temperature.
Ireland and the U.S. are tight like spandex on a fat guy.
the relationship between the deflection of the wire and the ccurrent is when the voltage is 12volt the current become higher.Another AnswerPresumably you are referring to the force on a conductor placed in a magnetic field? In which case, it is equal to the Flux Density of the field (in teslas), the length of the conductor within the field (in metres), and the value of the current passing through the conductor (in amperes).
Transformer rating is based on the maximum temperature a transformer can run at. This temperature is dictated by the amount of current flowing through the transformer windings. This is why transformers are rated in KVA (voltage * current), not kW - it doesn't matter what the phase relationship is between voltage and current, just the magnitude of the current.
kVA = kW divided by (power factor). The power factor is the cosine of the angle between voltage and current.
depending on kva class of the motor between 4-8 times the running current
Horsepower is a unit of power (weight over distance) and speed is a measurement of velocity (rate of movement).
starting current of 3 phase 75 KW induction motor
Yes of cours1 kw =1.25 kva wich mean6.5 kw =8.12 kvaif you have generator 8.12 kva it give you 6.5 kw=============================Answer #2:1 kw does not necessarily = 1.25 kvaThe relationship between KW and KVA depends on the nature of the load you'repowering, and is called the "power factor". It describes how closely the voltageand current peaks coincide in time. If the load has any inductive or capacitxivereactance, then the voltage and current waveforms become separated in time.The "KVA" is the product of the full voltage and full current without regard fortheir "phase difference", but the "real" power in KW is the KVA multiplied by thecosine of the phase angle. So if there's any inductance or capacitance present,then the KW is less than the KVA. But if the load is pure resistive, then thevoltage and current on the line are in phase, the angle between them is zero,and the KW and KVA are equal.When everything is just exactly perfect, and there is no reactance on the load orthe line, then your 6.5 KVA generator can just exactly supply 6.5 KW of load, withnothing to spare. More commonly, of course, a generator with somewhat morethan 6.5 KVA capacity is required in order to supply 6.5 KW of 'real' power.
because current is the ratio of voltage and resistance.
Power factor is the cosine of the phase angle between voltage and current. It is also KW/KVA.
3phese 460 volt 75 kw a/c drivi full load current
To convert from KVA (kilovoltamperes) to KWH (kilowatthours) first convert to KW (kilowatts) by multiplying by power factor. Power factor is the cosine of the phase angle between voltage and current. Then multiply by the number of hours that you run the load.
Liquidity
The relationship is expressed by Ohm's Law: V=IR (voltage = current times resistance).