There are nine flags in the 8086/8088.
In general, most of these flags are set as a result of some arithmetic or logical instruction and can be tested using the conditional branch instructions. Exceptions are DF, which controls the directionality of repeated string operations, IF, which controls interrupts, and TF, which controls debugging.
OCB 283- Orgando commando B type 2nd generation microprocessor version 83.OCB means Operate by CommandVinoth
Microprocessor are widely used in this generation for performing any type of electrical signal processing task. because of it's feaatures. Some of them are described here- 1> very fast processing 2> programmable 3> easily interface between peripherals 4>less extra hardware. 5> reliable 6>economical. 7>compact and portable.
Sounds like a digital TV. Try unplugging it for awhile and then plugging it back in. That forces a `hard reset' of the microprocessor and should free the screen. If not, you've got some other type of issue either with the TV itself or with the source.
The only type it is weak to is Ground Type,and rock type.
Cloyster's weaknesses are electric-type, fighting-type, grass-type, and rock-type.
It is mightily referring to Microprocessor 8086 . I think you saw "8086 microprocessor". The 8086 is nothing it indicates the number of microprocessor same as Digital or analog ic's . 8086 microprocessor has 20 Address buses and 8 data buses which has 1 Mb inbuilt memory for performing several type of airthmatical and logical operation.
Its 16bit microprocessor,and-> the 8086 has a 16bit databus 20bit address bus-> the intel 8086,is designed to operate in two modes namely(1) minimum mode(2) maximum mode
The Intel 8086/8088 is not a 32 bit machine. It is a 16 bit machine. It has 72 instruction types.
There are nine flags in the 8086/8088.SF - Sign Flag - The result is negativeZF - Zero Flag - The result is zeroAF - Auxillary Carry Flag - A BCD carry occurredPF - Parity Flag - Indicates the oddness or evenness of the number of bitsCF - Carry Flag - An unsigned carry occurredOF - Overflow Flag - A signed overflow/carry occurredDF - Direction Flag - Controls the direction of repeated string operationsIF - Interrupt Flag - Enables or disables interruptsTF - Trace Flag - Controls the debug single step interruptIn general, most of these flags are set as a result of some arithmetic or logical instruction and can be tested using the conditional branch instructions. Exceptions are DF, which controls the directionality of repeated string operations, IF, which controls interrupts, and TF, which controls debugging.
lifo
ARM
Type your answer here... The first microprocessor was found in 1971 by Intel, and it's name was Intel 4004.
A two-byte instruction gives the specific function instruction in two bytes, or two words. The first specifies the opcode, which tells the microprocessor what operation will occur. The second specifies the operand, or the data that the operation is done on.
Because each microprocessor type has its own unique machine code.
which type of microprocessors are used in servers
transmit is a type of light ray. what type i dont know
RIMM