0
How are spare keys coded to a 2006 ford explorer with OBD-2 software and only 1 old key OR with 2 NON programmed keys?
Wiki User
∙ 15y ago
Must have a programmer. No owner programming without 2 working keys.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you disable the tire pressure sensor on a 2006 Jeep Limited It has no spare wheel now as it's LPG converted but the display says the tire pressure is low in the non existent spare wheel?
Computer has to be re programmed at dealership.
Where could one go to order a used Explorer guitar?
The Gibson Explorer electric guitar was first made in 1958. The online auction website eBay has a large selection of Gibson Explorer guitars although this will fluctuate over time as some are sold and others listed for auction. It also sells spare parts for the guitars.
What does Harry Styles do in his Spare Time?
Harry Styles likes to get naked in his spare time.
When was Spare Change News created?
Spare Change News was created on 1992-05-08.
Where is the spare tire compartment on 1995 Jeep Cherokee Sport?
Spare tire compartment is in the trunk. The spare is mounted against the driver side body panel in the trunk. There is no hidden compartment - it should be clearly visible. It partially blocks the window. If you don't see a tire there, then the spare is missing.
How do you remove the spare tire on 2003 ford explorer?
how to remove the spare on a 2003 explorer
How do I authorize a key 2008 Ford Escape?
From the owner's manualProgramming spare keysYou can program your own coded keys to your vehicle. Please read andunderstand the entire procedure before you begin.Tips:• A maximum of eight keys can be coded to your vehicle.• Only use Securilock keys.• You must have two previously programmed coded keys (keys thatalready operate your vehicle's engine) and the new unprogrammedkey(s) readily accessible.• If no previously programmed coded keys are available, you must takeyour vehicle to your dealer to have the spare key(s) programmed.1. Insert a previously programmedcoded key into the ignition.2. Turn the ignition from the 1 (LOCK) position to the 3 (ON) position.Keep the ignition in the 3 (ON) position for at least one second, but nomore than 10 seconds.3. Turn the ignition to the 1 (LOCK) position and remove the coded keyfrom the ignition.4. Within ten seconds, insert the second previously coded key into theignition.5. Turn the ignition from the 1 (LOCK) position to the 3 (ON) position.Keep the ignition in the 3 (ON) position for at least one second, but nomore than 10 seconds.6. Turn the ignition to the 1 (LOCK) position and remove the secondpreviously programmed coded key from the ignition.7. Within twenty seconds of removing the previously programmed codedkey, insert the new unprogrammed key into the ignition.8. Turn the ignition from the 1 (LOCK) position to the 3 (ON) position.Keep the ignition in the 3 (ON) position for at least one second but notmore than 10 seconds.
How do you program a key to a 2003 Ford Escape?
Programming spare keysYou can program your own coded keys to your vehicle. Please read andunderstand the entire procedure before you begin.Tips:• A maximum of eight keys can be coded to your vehicle.• Only use Securilock keys.• You must have two previously programmed coded keys (keys thatalready operate your vehicle's engine) and the new unprogrammedkey(s) readily accessible.• If no previously programmed coded keys are available, you must takeyour vehicle to your dealer to have the spare key(s) programmed.1. Insert a previously programmedcoded key into the ignition.2. Turn the ignition from the 1 (LOCK) position to the 3 (ON) position.Keep the ignition in the 3 (ON) position for at least one second, but nomore than 10 seconds.3. Turn the ignition to the 1 (LOCK) position and remove the coded keyfrom the ignition.4. Within ten seconds, insert the second previously coded key into theignition.5. Turn the ignition from the 1 (LOCK) position to the 3 (ON) position.Keep the ignition in the 3 (ON) position for at least one second, but nomore than 10 seconds.6. Turn the ignition to the 1 (LOCK) position and remove the secondpreviously programmed coded key from the ignition.7. Within twenty seconds of removing the previously programmed codedkey, insert the new unprogrammed key into the ignition.8. Turn the ignition from the 1 (LOCK) position to the 3 (ON) position.Keep the ignition in the 3 (ON) position for at least one second but notmore than 10 seconds.
Does spare tire have a sensor on 2007 Ford Explorer?
On a 2007 Ford Explorer : ( NO ) the spare tire does not a sensor for the Tire Pressure Monitoring System ( TPMS )
Is there a tire pressure in the spare tire in a Explorer 2004?
NO - there isn't a pressure sensor inside the spare
Why wont rover 600 car start with spare key?
coded key, wrong chip code, or key that hasn't been coded. Call a dealer, he will set it up
Spare tire location in 1998 Ford Explorer?
Underneath the Explorer , just ahead of the rear bumper
Where is the Spare Tire Located on a 1998 Ford Explorer?
Underneath the Explorer , just ahead of the rear bumper
Is there a air pressure sensor in the spare tire in a Ford Explorer 2004?
I don't believe there is
Where is the spare tire on a 2002 ford explorer?
underneath the rear of the truck - lets down with a crank
Where is the evap canister for 96 ford explorer 5.0?
above the spare tire on the driver side
Where is the winch on the ford explorer 95 to drop the spare?
life the carpet in the truck in the back. you should have a bolt head underneath that you turn with a socket and the spare will drop down.
