try googling it, otherwise you have to take radio out, get serial number off it and visit your local Kia dealer and they can look it up for you.
there are for screws that hold it on. Two on the ash tray. and two on the cup holders then there are two holding the radio in.
Press and hold AS button, enter PIN code, press and hold AS button again To enter the PIN code, depress the 1 button until you get the correct number. Repeat using buttons 2 3 and 4.
turn on key and radio, hold program key 2 and 3, number will appear, write it down, press am/fm button another number will show, write it down, take numbers and car vin # to dealer get code.
IS IT A BLAUPUNKT RADIO? YOU CAN GET THE CODE HERE IF YOU'VE LOST IT: http://www.bluespot.co.uk/stock/decode.asp THEN HOLD DOWN THE 'AS' BUTTON UNTIL YOU HEAR A BEEP, THEN YOU GET THE FOLLOWING DISPLAY: 10 - - - - - PRESS BUTTON NUMBER 1 UNTIL YOU GET THE FIRST DIGIT IN YOUR CODE - PRESS BUTTON NUMBER 2 UNTIL YOU GET THE SECOND DIGIT IN YOUR CODE ETC... - HOLD DOWN THE 'AS' BUTTON UNTIL THE STEREO TURNS ON.
Depending on the make and model of the radio you input the code using 1-4 buttons then enter it by pressing 5 I will include a YouTube video tutorial about ford code entry instructions (see related links)and other tips with more details about how to calculate your ford radio code absolutely for free.
enter the code and then hold 5 or 6.which ever is your last number on the radio
hold the as button down and than enter your code
Acura dealer does it for free but may charge you to get the radio code or serial number you can hold two buttons and get the code and just call the dealer or I think you can do it online too once you have the serial for the radio
Take your car to the vw dealership and they will give will put the code into your radio, however they will most likely charge you $100 dollars for getting the code for you and putting it in the radio. I see about 3-4 cars a day come in for radio codes so once you get that code keep it in a safe place you might need it again. On my 1996 VW Jetta you must hold down the right seek or scan button until the display blanks out. Then you can enter the unlock code.
TO get the HOLD off and CODE back on- you turn key on and not start car- turn radio on and wait upto 24 hrs- CODE will show -then enter code for your car and hit OK*this was straight from the dealer
there are for screws that hold it on. Two on the ash tray. and two on the cup holders then there are two holding the radio in.
To insert the radio code for a 2003 VW Passat the correct code must be on hand. Turn the radio on and configure the code using the preset buttons 1-4. When the correct code is typed press and hold the right side of the seek button. If the code was correctly inserted the letters LSM will appear.
Your owners manual will have the code. Hold down the mode and scan buttons at the same time then enter the code using the # buttons.
Press and hold down the "mode" button until the radio beeps, then enter the code. I can't remember if you have to press "mode" again after entering the code or not, but i don't think so. If you don't know the code to your radio you will have to go into a L.R. dealership and they can tell it to you.
AnsOn erugh- the cabrio radio reset. The code is in your sound system manual (part of the larger manual). if you bought your car used, its likely the owner removed the card w/ the code. I've had my code memorized for years. I think you can take your car to VW to get the whole system reconfigured for a new security code if you can't find it. Sorry- and good luck. If the display says "SAFE" reset the radio display as follows: On the radio panel hold the "seek" button down by pushing it on the right. Let go, enter the radio code using the radio station buttons. Hold the "seek" button down again by pushing it to the right. The radio will come back on.
Switch on the radio and hold down the "BAND" button for at least three seconds and the word "code" will appear in the display. Now just enter the code that you have been given.
try disconnecting th battery and trying again The way to get back into your radio to set the correct code is:- press and hold the band button until the wrong number dissapears and "code" is displayed then enter the correct code to unlock the radio. what is the code???????????????????????