On your radio your preset stations each have a number 1,2,3,4,5,etc. The first preset station represents the first number in your code. if your code is 8642 then you would: press #1 preset 9 times. press #2 preset 7 times. press #3 preset 5 times. press #4 preset 3 times. (The first press is a 0) After you enter YOUR code (not this code) then press the CD button.
find the station that you like, press and hold the preset button for 2 seconds.
press preset 1 then up or down arrow to the No. you require then 1 preset again for next No. and so on till you have all four digits, press 1 preset again and Hey presto !
go to the station you want to change the preset on too then hold down the button you wish to set it too for a few seconds it will beep at you when it is set.
For my radio, you simply select the station you want and then hold the preset button down for about 5 seconds. The station is now set to that button. Note: Each of my 6 preset buttons will select two stations each, so you first must select the first or second preset, by tapping it once or twice, before performing the 5 second hold down.
I preset my alarm clock.
Reset the Preset was created in 2003-01.
Yes, the Hotpoint 15 CuFt Over The Range Microwave oven does have special preset functions, such as sensor cooking and preset time buttons.
The default (preset) view is _____ view print layout
I preset the clock so my alarm would go off
A preset resistor also known as a poteintometer is a type of resistor whos resistance is selected by the user. A preset maybe of any range i.e. from 1k to 100k or from 1M to 100M. a preset is used in many circuits where varyin resistance is required
Tune to the first station you want to save. Then press the #1 preset button and hold it in until you hear a beep. That station is now preset on the #1 preset. Continue with #2 and so forth.
WE USE Preset in a circuit to work it perfectly by adjusting a value & we cant change the value of preset after its working. Potentiometer can be used to vary from (0-n)
Press the 6th radio preset twice and then the 3rd radio preset once.
--alt preset-standard is the default recommended profile for the LAME mp3 encoder. See http://lame.sourceforge.net/
yes, that deck will lose the cards you sold
Tune the radio to the station you want to set into the preset. Push and hold the preset button for more than 2 seconds where you want the station stored. The display will flash to indicate it has stored the frequency.