The Power Steering hose is attached with a quick-connect that requires a Quick-Connect removal tool that should be available from you local auto-supply store. You need to know the diameter of the tubing / hose connection. There may be a universal tool for a range of sizes.
Yes, but 87 octane is all that is needed.
The heat shields on the Cherokee models are needed. The floor pans in the Cherokee models are thin and are penetrated by heat very easily. If you have driven one much, you will notice that the drivers and passengers front floor pans get quite warm from the engine heat. This is true with the muffler also. If it is not shielded the floor will get really hot and penetrate into the cab.
The manual transmission in a 1994 Cherokee uses 80 W 90 gear oil, not ATF.
E12 external torx
I have a 2001 i needed a new pcm, or some times u need to get your key recoded
Use a 3/8 inch quick disconnect fitting removal tool. Should be about 5 dollars from an auto parts store.
There is no special tool needed to remove the power steering reservoir cap of a Volkswagen Golf. It can be removed with a flat head screwdriver.
The white people needed more land and thought the United States should have one goverenment not two.
you will need a special tool called a steering wheel puller. they are needed to compress the rings around the column and wheel and release it so you can remove the main nut.
Just a 36mm wrench and a holding devise (spanner) to remove the fan clutch.
the rubbuish bin needed removal
No, there is no special driver needed
He was a difficult individual so he needed special attention.He was a difficult individual so he needed special attention.He was a difficult individual so he needed special attention.He was a difficult individual so he needed special attention.He was a difficult individual so he needed special attention.He was a difficult individual so he needed special attention.He was a difficult individual so he needed special attention.He was a difficult individual so he needed special attention.He was a difficult individual so he needed special attention.He was a difficult individual so he needed special attention.He was a difficult individual so he needed special attention.
It requires some expensive special tools and specialized knowlage to repair a rack and pinion steering gear, it is easier and less costly to replace the rack and pinion with a remanufactured unit than to purchase the special tools to repair a rack and pinion steering gear
Yes and it should ge available at the parts store pretty cheap.
I dont know try POWER STEERING FLUID
Front caliper: 9mm hex socket (special), Rear: T-45 Torx.