0
What size socket is needed to take the rear caliper mounting bolts off a 1999 grand Cherokee?
Wiki User
∙ 14y ago
E12 external torx
Wiki User
∙ 15y ago
Wiki User
∙ 14y ago7mm
Add your answer:
Earn +20 pts
Where is the oil filter in a 2013 Jeep Grand Cherokee 3.6 6 cylinder?
Center top of the engine. It is a paper cartridge under a plastic cap. You use a 24 mm socket to unscrew.
Change headlight 95 Jeep Grand Cherokee?
Open the hood and look for a acess hole in the radiater support bracket just above the headlite. You will need a long torx screw driver to reach the adjustment screw (only one for each lite). Good luck.
Where is the 2001 jeep Cherokee blower motor resistor exact location at the blower itself?
Right behind the glove box. Remove the three screws at bottom of glove box. Once it is off you will see it on the blower casing. Remove shroud from below with an 8mm socket. Same socket will remove resistor. Total work time ~10-20 minutes.
How do you remove hub bearing on 1996 jeep Cherokee sport 4.0L?
You would need to remove the brake caliper, brake caliper bracket and also the brake rotor. The cotter pin and nut that holds the axle in place also needs to be removed, and then the axle needs to be tapped out of the hub with a socket. Then you can get at the three bolts that hold the hub into place. An instructional video of this procedure has been listed below to help.
Does my 2003 Jeep Grand Cherokee have shocks or struts?
There is a difference between the two, however your 97 Jeep Grand Cherokee has a modern version of the conventional shock system, where the shock and coil spring are separated under the live axle. Good news is anyone with an extension, socket wrench, channel lock pliers and 13 14 and 15 millimeter sockets can change them out in a matter of minutes.
What is the socket size for the Caliper bolt on a 2007 Kia Sorento?
14mm socket is used for main mounting bolts, there are two. The caliper alignment pins use 12mm
What size Allen socket is needed to remove caliper bolt on a 2004 Escape?
What size Allen socket is needed to remove bolt from caliper on 2004 ford escape
What tool do you need to get the front caliper off a 1990 Cherokee sport?
a 12 mm socket 2 bolts on the back of the caliper
What size are the Jeep Cherokee caliper bolts?
7mm (metric) 3/8 " socket dr Hex
What tools are needed to change the rotors on a 2007 Camry?
21mm socket and breaker bar to remove lug nuts, and a 17mm socket to remove the two caliper bracket bolts, and a 14mm socket or wrench to remove caliper from bracket. you will also need a c-clamp to shove caliper back.
What size Allen socket is needed to remove bolt from caliper on 2002 ford escape?
I have a 2003 Escape and it took a 7 mm socket.
What tool is needed to get caliper pins off 1993 blazer?
3/8" hex bit socket
What size socket is needed to remove caliper bolts on a 1996 Chevy s-10 4x4?
A 3/8" Allen socket or wrench will work.
What kind of wrench is needed to remove the front caliper bolts on a 2005 dodge stratus?
7mm hex socket
What wrench is needed to remove brake caliper for 1992 ford tempo?
your going to need a t-40 torx socket.
What size Allen key wrench is needed for removal of the front caliper of a 2007 Mercury Mariner?
Front caliper: 9mm hex socket (special), Rear: T-45 Torx.
What is the Caliper socket size for a 2002 Chevy Avalanche?
15mm Socket size.
