0
To remove the caliper bolts on a 2004 Jeep Grand Cherokee, you'll typically need a 13mm socket. It's advisable to use a ratchet or a breaker bar for added leverage, especially if the bolts are rusted or tightly secured. Always ensure the vehicle is safely lifted and supported before attempting any brake work.
What else can I help you with?
What size Allen socket needed to remove brake calipers?
9mm
What size star socket is needed for the calipers on a 1995 Mercury Villager?
Torx T 40 socket
How do you remove the front brake calipers on a 89 Ranger?
To remove the calipers just knock out the two square pins that are on the top and side. The best way i found to do this is use a long socket extension. put the insert end (the end you would put the socket on)against the pin and tap on the other side .
What tool do you need to remove the calipers from a 2007 Chevy Malibu ls?
15 mm socket and ratchet for the caliper to bracket. if not it is a 13 mm socket and ratchet. the bracket to spindle is 18mm socket and ratchet
What size Allen socket is needed to remove caliper bolt on a 2004 Escape?
What size Allen socket is needed to remove bolt from caliper on 2004 ford escape
What size and type of tool is required to remove the bolts holding the 1995 ES300 calipers in place?
17 mm wrench or socket
What size socket to remove bolts on the calipers when replacing brake pads on a 1997 Dodge Ram 1500?
3/8 inch Allen
What size socket is needed to remove spark plug on a 2002 Hyundai Accent?
You will need a 5/8 socket.
What socket size is needed to remove the front hub nut from a Peugeot 306?
You will need a 35 mm socket.
How do you replace the calipers on a 1999 Dodge Ram?
FIRST, YOU REMOVE THE TIRES THEN YOU GET EITHER 3/8 OR 10 MILLIMETER HEX SOCKET TO REMOVE THE CALIPER. REMOVE THE BRAKE LINES AND PULL HER OFF. INSTALLATION IS REVERSE
What is the socket needed for the headbolts on a 98 Cherokee straight 6?
12 point 9/16 inch deep wall.
What size socket is needed to remove spark plug on a 97 Hyundai accent?
You'll need a 5/8" socket.
