0
What else can I help you with?
How can you prevent a smear from accidentally washing-off a Slide?
You can prevent a smear from accidentally washing-off a slide by using heat to fix the cells to the slide and it can be achieved by following this procedure:Allow the smears to air dry first.Fix the cells to the slide by gently heating.Hold the slide on the frosted end with your clothespin found in your cabinet.Do this by quickly passing the underside of the slide over the flame of a Bunsen burner.Each time, touch the slide to the back of your hand - when it becomes uncomfortable, it is done.
How do you fix a microbiology slide?
In order to heat fix your microbe to your slide - you need to let your smear air dry. Once it is completely air dried. Pass the slide 2 or 3 times quickly over an open flame like a Bunsen burner. This does three things, 1. Kills the bacteria 2. Firmly affixes the smear to the microscope slide. 3. Allows the sample to more readily take up the stain.
What happen the microscope slide on the flame?
Heating a microscope slide over a flame can cause it to crack or shatter due to uneven expansion of the glass. It is not recommended to heat microscope slides in this manner as it can be dangerous and may damage the equipment.
What is meant by heat fixing a bacterial smear?
to allow the excess water to dry out before heating. if heated right after, the water would cause the smear to overheat and denature some features in the stain. and those features would no longer be seen
What precautions are important when a prepared slide is observed under the microscope?
Microscopes work on the principle of magnifying light rays passing through a tiny object. The object should be transparent or translucent and colored to be properly viewed under a compound microscope. Some of the mandatory requirements to prepare a good slide for viewing are as follows: Before creating a smear, always check that the slide is clean and perfectly transparent. It should also be microbe free. So, take a slide and wash it first with soap-water, and then wipe it with ethanol (ethyl alcohol). This makes the slide clean and sterilized. With regard to preparing a slide of bacterial specimen, when you create a smear, do not make a thick layer of smear. Take very little quantity of the inoculum. If by chance you take too much of the inoculum, spread it over the slide to a larger area, such as to avoid a thick smear. Air drying is necessary, as it lets the bacteria congregate at their places. Heat fix the slide with precision. Too much heat fix can kill the organism, and too little of it will make the organisms too loosely bound to the slide surface. If they are loosely bound, they will fall off when you flood the slide with stain. One good way of identifying the extent of heat fix is to feel it after you pass the slide through the flame. It should neither be too hot nor warm. It should give you the sense of heat but tolerable. When you stain the slide, do not stain the whole surface of the slide. This wastes much of the stain and is messy. Cleanliness is very important in all science experiments. Just staining the area containing the smear is enough. Usually, stainings are done for a minute or two, but for certain experiments like endospore staining, the extent of staining time may be as long as 10 mins or even more. During such cases, ensure that the stain does not dry over the smear. Maintain liquidity of the stain, as it is to be washed after some time. While washing the slide after staining, do not let the water stream fall directly on the smear. This may disrupt the smear. Let the stream of water flow slowly along the surface, such that only the stain is flooded and the smear is intact. While preparing fungal slides, take the stain first, and then the hyphal fragments. Crush the hyphal fragments properly by placing a coverslip over the fragments (avoiding air bubbles) and the slowly tapping it with the butt of a pencil. Always observe under 10X first. This will give you an idea of the location of a good area for observation. After this, you may prefer to switch over to 45X. 100X objective in compound microscopes is always used as an oil-immersion objective, so do not ever observe at a specimen at 100X without oil.
How can you prevent a smear from accidentally washing-off a Slide?
You can prevent a smear from accidentally washing-off a slide by using heat to fix the cells to the slide and it can be achieved by following this procedure:Allow the smears to air dry first.Fix the cells to the slide by gently heating.Hold the slide on the frosted end with your clothespin found in your cabinet.Do this by quickly passing the underside of the slide over the flame of a Bunsen burner.Each time, touch the slide to the back of your hand - when it becomes uncomfortable, it is done.
How do you fix a microbiology slide?
In order to heat fix your microbe to your slide - you need to let your smear air dry. Once it is completely air dried. Pass the slide 2 or 3 times quickly over an open flame like a Bunsen burner. This does three things, 1. Kills the bacteria 2. Firmly affixes the smear to the microscope slide. 3. Allows the sample to more readily take up the stain.
How do you use smeared in a sentence?
As a verb: First smear the white makeup completely covering the whole face, ears, and neck, then you start painting the face of the clown. As a noun: The technician looked at the smear on the slide to see if she could identify any bacteria present.
What is the Result of over heating the bacterial smear?
When you heat the bacteria more than three times on the flame of Bunsen burner, the bacteria will damage and if you stain this damaged bacteria, the shape of bacteria is not typical and sometimes you just see the residue of stain on the slide.
What happen the microscope slide on the flame?
Heating a microscope slide over a flame can cause it to crack or shatter due to uneven expansion of the glass. It is not recommended to heat microscope slides in this manner as it can be dangerous and may damage the equipment.
What is the purpose of fixing the smear?
Heat fixing a smear kills the bacteria with minimal distortion, allows for better staining, and firmly affixes the bacteria to the slide. Chemical fixing is used to preserve fine cellular structures and might stop internal processes in place, protect the cell from damage, or strengthen the cell's structure.
Why can't a smear be gently heated over a a flame to speed up the drying process?
Heating a smear over a flame can cause uneven drying, leading to distorted or damaged sample morphology. Additionally, it can alter the chemical composition of the sample, affecting the results of subsequent staining and microscopic examination. It is safer and more effective to allow smears to air dry at room temperature.
Why do you air-dry a smear?
Air-drying a smear helps to fix the cells onto the slide, preventing any loss or distortion during further processing steps like staining or examination under a microscope. It also helps to evaporate any excess water, improving the visualization of the cells.
What is the preparation of smears and simple staining?
smear is the putting and fixing of staining sample on glass slide which is done by first putting the a drop of water on slide and then inoculation is put over it which is then spread slowly in round form by inoculating loop and dry it by very light heat to fix it.Simple staining is the process in which a dye knwon as methylene blue is spread over smear to colour the microbe whcih can be then washed by 70% alcohol so that extra dye can be removed and then the sample is ready to observe under microscope
What is the purpose of covering the smear with bibulous paper when performing the endospore stain?
Covering the smear with bibulous paper during the endospore stain process helps to wick away excess stain and prevent the slide from drying out. This ensures that the endospores are properly stained and the background is clear for observation under the microscope.
Why is it essential that smears be air-dried before heating the slide and why cannot they be gently heated over a flame to speed up the drying process?
Any heat much over room temperature at that point would denature the cells due to the water content on the slide. Even if it was gentle, the heat from the flame would be enough to sizzle them like tiny fried eggs. :)
What is meant by heat fixing a bacterial smear?
to allow the excess water to dry out before heating. if heated right after, the water would cause the smear to overheat and denature some features in the stain. and those features would no longer be seen
