steam from the turbine passes through tubes that are suurounded by water that is cooler than the steam
the steam is therefore cooled
the steam then turns back into water
condensation
=condensor
A condenser is generally an object made from glass, used to condense a gas to a liquid.
What is the liquid that leaves the condenser called
Yes it can convert into gas,bcoz it reqired high temperatue to convert liquid nitrogen to gas.
to convert the gas form of a substance into a liquid. If the temperature and boiling points are kept constant, then the substance with the lower boiling point will be able to be evaporated and condensed, thus separated. The condenser ultimately just cools the gas form of the substance so it may return to the liquid state.
A condenser is used in systems to remove heat from a substance, typically by transferring it to another medium such as air or water. In HVAC systems, condensers are used to remove heat from refrigerant vapor and change it back into a liquid state. This process allows the system to operate efficiently and maintain desired temperatures.
The Refrigerant enters the condenser as a high pressured gas, the condenser then condenses that gas and changes it to a liquid form.
Condensation turns a gas into a liquid.
It has an internal blockage! Air conditioning gas cools as it expands (as it changes from liquid to a gas). It is meant to be a liquid in your condenser but if your condenser has a blockage (say some dirt or other contaminent) then the liquid loses pressure on the other side of the blockage and becomes a gas. This makes your condenser really cold and frosty on the outside!
A condenser is generally an object made from glass, used to condense a gas to a liquid.
A condenser.
This equipment is called condenser.
It is fitted on discharge line after condenser, where the gas enters in liquid forms.
The condenser receives hot high pressure gas refrigerant from the air conditioning compressor.It cools this gas (it looks like a radiator) turning the gas into a cooler liquid. (condensing it)
A heat exchanger is a device that transfers heat from one fluid to the others. A condenser is simply a heat exchanger. It compresses refrigerants into a hot gas to then condense them into a liquid. Majorly condenser is used to cool the required vapor and heat exchanger is used to heat the required liquid.
A condenser in a fan is typically used to cool down the refrigerant gas that has been compressed by the compressor. This process helps to release heat from the refrigerant and convert it back to a liquid state, thus allowing the fan to blow cool air.
A condenser is used in refrigeration systems to remove heat from the refrigerant gas and convert it into a liquid state. This process helps to release excess heat produced during the refrigeration cycle and allows the refrigerant to circulate back to the evaporator for further cooling. The condenser plays a crucial role in maintaining the efficiency and proper functioning of the refrigeration system.
Condesor- cools the liquid formed gas after compressor compresses. After condensor it pass through the expansion valve, then again liquid formed gas expanses to gas form and produses cooling .this cooled gas then passes through the evaporator coils