The current in a 7200 volt line depends on the power being drawn and the resistance of the circuit. Using Ohm's Law (I = V/R), where I is the current, V is the voltage (7200 volts), and R is the resistance, you can calculate the amperage based on the specific conditions of the circuit.
watts = volts * amps--> Amps = watts/ volts therefore; 2000/220= 9.09 amps
Since watts and volt-amps are different units of power, you cannot directly convert watts to volt-amps without considering the power factor of the load. In an ideal resistive circuit, 100 watts would be equivalent to 100 volt-amps. However, in practical applications with reactive components, the relationship between watts and volt-amps can vary.
The equation that you are looking for is Amps = Watts/Volts. There are 6000 watts in 6kW.
Amps (A) measure electrical current flow, while volt-amps (VA) measure apparent power in an electrical circuit, which is the combination of both real power (measured in watts) and reactive power. Essentially, amps refer to current, while volt-amps refer to total power.
To find the current in amps that a 750 watt, 120 volt heater draws, you can use the formula: Amps = Watts / Volts. So, 750 watts divided by 120 volts equals 6.25 amps. Therefore, the heater draws approximately 6.25 amps.
The formula you are looking for is I = W/E. Amps = Watts/Volts.
Multiply the vots by the amps to find the volt-amps. Or divide the volt-amps by the voltage to find the amps.
Depends on the battery. It is listed on the battery as Cold Cranking Amps (CCA).
50
2.083 amps
62.5 amps
watts = volts * amps--> Amps = watts/ volts therefore; 2000/220= 9.09 amps
at 240/50 volt itequates to 4amp
55/12=4.6
It is drawing .06 amps.
you get a transformer...
It would be at least 250 amps, maybe 300 amps.