In a digital system, the Bit Error Rate (BER) should be low, as a high BER indicates that a significant number of bits are being incorrectly transmitted or received. A low BER ensures better data integrity and reliability, leading to improved performance of the communication system. Reducing the BER is crucial for applications requiring accurate data transmission, such as in telecommunications and data storage.
A flow rate value greater than 1.00 indicates that the amount of material passing through a certain point is more than the total available amount, which is not physically possible. It suggests a miscalculation or error in measurement, as the flow rate should always be within the constraints of the system's capacity.
n
The error rate directly impacts channel capacity by determining the maximum amount of information that can be reliably transmitted over a communication channel. As the error rate increases, the likelihood of data corruption rises, which reduces the effective capacity of the channel. According to Shannon's capacity theorem, if the error rate exceeds a certain threshold, the channel's capacity can drop significantly, making it challenging to achieve reliable communication. Therefore, minimizing the error rate is crucial for maximizing channel capacity and ensuring efficient data transmission.
The error rate in DNA replication for eukaryotes is approximately 1 in 10 billion nucleotides, thanks to the high fidelity of DNA polymerases and various proofreading mechanisms. Despite this low error rate, mistakes can still occur, which are often corrected by DNA repair pathways. Overall, the combination of accurate replication and repair systems helps maintain genomic integrity in eukaryotic cells.
Heart muscles has there own rhythm of contraction. The sinoatrial node has the fastest rate of contraction. That is why it governs the rhythm of the heart. You have the control of the autonomic nervous system over the heart rate. Stimulation of the sympathetic nervous system increase the heart rate. Stimulation of the parasympathetic nervous system decrease the heart rate.
In a computer system, the bit error rate is based on the percentage of bits transmitted and received compared to those that resulted in error.
The error rate is less taht 1%. You should have your valves inspected often.
An old fashioned dial scale is more accurate than a digital scale. The error rate for digital scale is only 1%, which isn't too bad.
A: The last time that i kept up with types of systems there were only three what is along?. Well anyhow type-0 system is one that requires a constant error signal to operate type-1 a constant rate of change of the controlled variable requires a constant error signal under steady state condition. type 1 is usually referred as servomechanism system. type-2 a constant acceleration of the control variable requires a constant error under steady state condition. type-2 sometimes is referred to as zero velocity error system
The channel used in a digital communication system is used to convey an information signal. A channel has certain capacity for putting in information that is measured by bandwidth in Hz or data rate.
This model of elliptical features two types of heart rate monitoring a digital heart rate monitoring system and polar telemetry heart rate monitoring.
A flow rate value greater than 1.00 indicates that the amount of material passing through a certain point is more than the total available amount, which is not physically possible. It suggests a miscalculation or error in measurement, as the flow rate should always be within the constraints of the system's capacity.
The bit error rate is a standard transmission-error rate of a medium such as copper wire, coaxial cable, or fiber-optic cable. Coaxial cables have a low error rate that is generally 1 in 1 billion bps.
What is the baud rate of a digital signal that employs the differential Manchester scheme and has a data transfer rate of 2000 bps.
0.8435% error rate.
the only advantage is generation of ASK is very much easy. as,it is known as on-off keying. otherwise,it is not advantageous,as,it has highest rate of probability of error......
n