0
What else can I help you with?
Can you use water from tumble dryers in an iron?
No, water from tumble dryers is not suitable for use in an iron. The water used in irons should be clean and free of any potential contaminants or residues that can damage the iron and affect its performance. It is best to use distilled or demineralized water in irons to prevent mineral buildup and clogging.
How do you use volts?
Volts are used to measure the electrical potential difference or voltage in a circuit. To use volts, you would typically measure the voltage across a component in a circuit using a multimeter or voltmeter. This helps in determining if the component is receiving the correct amount of voltage for proper operation.
An ammeter and voltage range are measure the current and voltage electric lamp if mistake meter interchange what will happen?
1. Voltmeter has high impedance and hence will restrict the current severely.a) Electric Bulb will not glowb) The Ammeter will just measure the current that Voltmeter allows and since this current is much smaller than actual current nothing will happen to ammeter.c) The Voltmeter will measure the Voltage that is being applied.d) This will allow you to measure the resistance of the Voltmeter.VR=V/I
Is it possible to simultaneously operate 1300 w hair dryers on the same 120v circuit without tripping 15 a circuit breaker?
Look on the data plate on the hairdryer. There you will find the manufacturers specifications as to the wattage of the dryer and the voltage range it has been designed to run on. So the answer is that a hairdryer can be plugged into a 120 volt receptacle if it was designed for use on that voltage. If you want to know the current it takes, you can calculate it by dividing the wattage by the voltage. The answer will be in amps. If the hairdryer is a type that was designed to run only on 230 volts - such as are made for home use in Europe and elsewhere,where they use that voltage as standard - then don't try to use it on 120 volts because you will not get enough heat from it!
To measure the voltage in a standard household electrical socket an electrician would you what settting on a volt meter?
An electrician would use the AC voltage setting on a voltmeter to measure the voltage in a standard household electrical socket. This setting is specifically designed to measure the alternating current voltage commonly found in household electrical systems.
In the unknown of measuring the voltage what should be the setting of VOM selector?
Use the highest available voltage setting. One should know the system voltage before attempting to measure, other wise it may lead to accidents.
Why should you NOT use hair dryers?
because it takes to much energy and it's a waste of time and there is led in some hair dryers
What unit do you use do measure voltage?
Believe it or not, THE VOLT.
What do you use to measure voltage in an electronic circuit?
A Voltmeter.
What is The Function of Meter?
it is use to measure electric potential (voltage).
How do you use an analog multimeter to measure voltage?
Just set to AC or DC volts and probe the two points you wish to measure voltage across.
How can I measure voltage accurately in an electrical circuit?
To measure voltage accurately in an electrical circuit, use a digital multimeter set to the voltage range of the circuit. Connect the multimeter's probes across the component or points where you want to measure the voltage. Read the displayed voltage value on the multimeter's screen for an accurate measurement.
How do you measure the current and voltage in high tension line?
To measure high voltage use suitable instrument transformer (potential transformer) Very carefully. It can kill you. The higher the voltage the more the danger or arcing over even when two conductors are not touching. Voltage meters are rated and the rating should not be exceeded. Depending on the voltage you will need the proper meter and a high voltage probe rated for the voltage you are measuring. If you don't know what you are doing, don't mess with high voltage. Leave to the pros.
Voltmeter is used for?
A volt meter is use to measure the voltage of the circuit.
What is the function of potentio meter?
it is use to measure electric potential (voltage).
How is voltage measured?
Use a voltmeter with a high input impedance and measure at the source the voltage.
Do dryers use suction?
No
