It depends in which country you live, as the colours depend upon national or international standards. In the UK, for example, the colours were red, yellow, and blue. These days, in order to integrate with EU requirements, those colours are being replaced with brown, black and grey.
In Canada the phase colours are Red, Black and Blue.
In the US the phase color coding is Black, Red and Blue for 208 volts and Brown, Orange and Yellow for 480 volts.
See related links below.
12-2 wire typically carries 120 volts in residential settings and 240 volts in certain appliances or systems that require higher voltage.
The three colours used in the UK are: blue (live), brown (neutral), yellow and green stripes (earth). The standard UK domestic voltage is 240 volts.
The voltage has nothing to do with the capacity of a wire to handle current. A #12 copper wire with an insulation factor of 60, 75 or 90 degrees C is rated at 20 amps.
No, it is not possible to use 240 volts with a 120 volt supply directly. You would need a transformer to step up the voltage from 120 volts to 240 volts. Attempting to use 240 volts with a 120 volt supply without a transformer can damage equipment and pose a safety hazard.
you can use two hot wire different phases with a double pole braker .
The standard voltage conversion ratio from 240 volts to 120 volts is 2:1.
The three colours used in the UK are: blue (live), brown (neutral), yellow and green stripes (earth). The standard UK domestic voltage is 240 volts.
Unlikely- European countries run on 240 volts which is about double the US standard.
12-2 wire typically carries 120 volts in residential settings and 240 volts in certain appliances or systems that require higher voltage.
Standard wiring for 220 volts which is also referred to as 240 volts, commonly has four wires. One is red, one is black, one is white and one is a bare copper wire. The red and black wire carry 120 volts each, the white wire in usually your neutral which hooks up to your ground along with the bare wire.
30 amps.
The three colours used in the UK are: blue (live), brown (neutral), yellow and green stripes (earth). The standard UK domestic voltage is 240 volts.
The voltage has nothing to do with the capacity of a wire to handle current. A #12 copper wire with an insulation factor of 60, 75 or 90 degrees C is rated at 20 amps.
Yes <<>> In North America, a three wire 120/240 volt system uses a neutral wire. For 240 volts two "hot" wires are used with no neutral.
current = voltage/resistanceAssuming the 240 volts is across the 100 ohm wire, 2.4 amperespower = current * voltageResulting in the wire dissipating 576 watts... One hot wire!
3/0 wire 3/0 wire
A #14 wire will do the job.