0
Cloudiness in the oil of a Thiele tube indicates the presence of impurities or moisture, which can affect the accuracy of temperature readings. It is important to remove these impurities through proper purification methods to ensure reliable results when using the Thiele tube for experiments.
What else can I help you with?
Why does a cloudy mixture is seen after shaking a mixture of ethanol and coconut oil?
Because the oil does not dissolve in the ethanol, instead it becomes emulsified into tiny particles due to the shaking. The particles give the mixture a cloudy appearance.
What happens when oil is poured in to u- bend test tube of water?
When oil is poured into a u-tube test tube of water, the oil will separate from the water due to their difference in density. The oil, being less dense, will float on top of the water, creating two distinct layers. This is because oil is hydrophobic and does not mix with water.
What causes the mirror to become cloudy?
A cloudy mirror is typically caused by a build-up of dirt, oil, or moisture on the surface. It can also result from using the wrong cleaning products that leave residues on the mirror. Regular cleaning with a soft cloth and a gentle cleaner can help prevent a cloudy appearance.
What gives the cloudy white emulsion?
A cloudy white emulsion may be caused by improper mixing of oil and water-based ingredients, temperature fluctuations, or using ingredients that are incompatible and unable to form a stable emulsion. It is important to ensure proper emulsification techniques and use compatible ingredients to achieve a clear emulsion.
If a tube of hydrogen gas is placed above a test tube of air why would the tube of air give a positive test for hydrogen after a few seconds?
the hydrogen would likely begin bonding with the oxygen in the test tube, and become heavier. As this product falls out, it would pull more hydrogen to the end of the tube, putting more hydrogen in contact with the oxygen, much the same way as an oil lamp pulls the oil fumes from the base of the lamp to the flame.
Why the thiele tube is shaped the way it is?
The thiele tube allows convection currents in the oil when it is heated meaning there is fairly uniform distribution of temperature.
What is a thiele tube is used to?
A Thiele tube is a simple device used in chemistry for measuring the melting or boiling points of substances. It consists of a capillary tube attached to a thermometer and is immersed in the substance being tested. Changes in temperature are observed to determine the melting or boiling point accurately.
How do you tell if there is water in the oil?
The oil will be cloudy and look like chocolate milk.
Where does the oil go in for a 1998 ford expedition?
The motor oil, in your 1998 Ford expedition, should be put in the oil fill tube. The oil fill tube should have a That labels it as the oil fill tube.
Does fish oil become cloudy when store in refrigerator?
Yes it does.
Why does a cloudy mixture is seen after shaking a mixture of ethanol and coconut oil?
Because the oil does not dissolve in the ethanol, instead it becomes emulsified into tiny particles due to the shaking. The particles give the mixture a cloudy appearance.
What liquid is in the upper part of the test tube when you mix water and oil?
oil
What is the name of the part that your oil dipstick goes into?
The part that the oil dipstick goes into is called the oil filler tube or dipstick tube. It serves as the conduit for the dipstick to access the oil reservoir in the engine. This tube allows for the measurement of oil levels and provides a means to add oil when necessary.
How to remove engine shroud on 1999 buick lasabar?
I have a 2002 LeSabre so if it is like mine and if you mean the plastic cover over the engine, you remove the oil tube in the front of the engine by screwing off the entire tube and then the cover lifts off out of a ring in the back of the engine. The oil tube has the cap on it, but often the tube comes off with the cap, if not grab the shank of the tube and turn counterclockwise.
How do you replace an oil dipstick tube on a 1999 Honda civic?
remove bolts and clip. Then remove oil dipstick tube.
The oil dip stick has broking in the oil tube how do i repair this problem?
you might be able to pull the tube itself out and there ya go
What is an oil screen?
The oil screen is attached to the bottom of the pickup tube of the oil pump in the oil pan.
