0
What else can I help you with?
How do you separate iron from sulphur in a mixture of iron fillings and sulphur?
you an use a magnet to get the iron fillings out
What was the new substance formed after heating the iron-sulfur mixture?
The result of heating iron filings and sulfur powder mixture shows an exothermic reaction which forms a compound, iron sulfide.
Is sulphur a mixture or a pure substance?
Sulfur is an element. Elements are not mixtures.
How do you separate a mixture of water and sulphur?
By filtration using for ex. filtering paper.
Who would you separate iron and sulphur?
You need a magnet to separate iron from a mixture (not from a compound).
How do you separate iron from sulphur in a mixture of iron fillings and sulphur?
you an use a magnet to get the iron fillings out
How do you obtain sulphur from a mixture of sulphur and iron fillings?
To obtain sulphur from a mixture of sulphur and iron fillings, you can use a magnet to separate the iron fillings from the mixture. Then, you can heat the remaining mixture to sublimate the sulphur, which will turn into a gas and can be collected by condensing it back into a solid form.
How can you separate the mixture of sulphur power and iron fillings?
You can use a magnet to separate the iron fillings from the sulfur powder. The iron fillings will be attracted to the magnet, allowing you to easily separate them from the sulfur powder.
What happens if you start heating a mixture of sulfur powder and iron fillings?
Heating a mixture of sulfur powder and iron fillings will produce Generation of black iron sulfide (FeS) because of insufficient oxidation of sulfur into the iron oxide +3, and Fe2O3 iron sulfide is black, not yellow over iron sulfide (FeS2) ,can be called pyrite. Use iron fillings and sulphur powder and distinguish between these on the basis of: i) appearance i.e., homogeneity and heterogeneity ii) behavior towards a magnet iii) behavior towards carbon disulphide a solvent iv) effect of heat.
What are five examples of mixture?
five examples of mixture are 1.sulphur powder and iron fillings 2.rice and pulse 3.nuts and bolts 4.salt and water 5.sandwich
What would happen if you pass a magnet over a mixture of iron fillings and sulfur powder?
The iron fillings would be attracted to the magnet due to their magnetic properties, separating them from the sulfur powder. This phenomenon is known as magnetic separation and is commonly used to isolate magnetic materials from non-magnetic substances in a mixture.
What type of mixture results when adding sulphur to water?
Sulphur plus water is a nonhomogeneous mixture.
How do you separate sulphur from mixture of sulphur and sand?
It is very simple
How do you separate sulphur from a mixture of sulphur and sand?
It is very simple
How do you separate sulphur form a mixture of carbon particles powder rolled sulphur?
One method of separating sulphur from a mixture of carbon particles and rolled sulphur is by using a process called sublimation. Since sulphur sublimes at a lower temperature compared to carbon, you can heat the mixture to a specific temperature where sulphur will vaporize and then condense back into solid form separately from the carbon particles. This way, you can isolate sulphur from the mixture.
What will evaporate from the mixture of sulphur and carbon disulphide?
Carbon disulphide will evaporate from the mixture of sulphur and carbon disulphide as it has a lower boiling point compared to sulphur.
What is mixing sulfur with iron fillings?
When you mix Iron filings and Sulphur crystals together, you form a mixture of Iron and Sulphur from which both the components can be separated by physical means. But if you heat the mixture strongly, then it becomes a compound of Iron Sulphide from which the two components cannot be separated by physical means.
