0
What else can I help you with?
What are ballast tanks made out of?
Ballast tanks are typically made out of steel to withstand the pressure of water when the tanks are filled or emptied. Some tanks may also be lined with coatings to prevent corrosion and improve durability. Additionally, modern ballast tanks may incorporate advanced materials such as fiberglass or reinforced plastics for lighter weight and increased resistance to corrosion.
Can choke replaced by a resistor in fluorescent lamp circuit?
fluorescent lamp work on the principle of ionizing the gas , which requires very high potential difference . this excess voltage is provided by the choke coil . when the starter breaks the circuit , current suddenly drops , thus to maintain the current the choke coil a very high voltage is supplied by the choke coil . this very high voltage cannot be obtained from a resistor or a rheostat , since it being a linear element , thus it cannot be a replacement for choke.
How to connect ballast?
To connect a ballast, first, ensure the power is turned off. Then, match the wiring from the ballast to the wiring in the fixture according to the wiring diagram provided with the ballast. Make sure all connections are secure and insulated properly before restoring power.
Can T8 LED tube light be used with ballast and can ballast be removed and will it work?
A T8 LED tube has to be used with a ballast to bring the correct voltage to the tube for it to operate correctly. Removing the ballast from the circuit will prevent the tube from operating.
If 227v connected to 120v ballast what happens?
If a 227V power source is connected to a 120V ballast, the ballast may get damaged due to the excessive voltage. It is important to always ensure that the voltage input matches the rated voltage of the ballast to prevent such issues.
Where is the ballast resistor on a 2000 Chrysler Sebring convertible?
It does not have a ballast resistor.It does not have a ballast resistor.
Where is the ballast resistor for a 1994 Jeep Cherokee?
It does not have an ignition ballast resistor.It does not have an ignition ballast resistor.
Where is the ballast resistor located on 1985 d100?
The ballast resistor is on the left side inner fender.
Location of ballast resistor for 94 Dodge Ram 1500?
A 1994 Dodge Ram does not have a ballast resistor.
Where is the ballast resistor located on a 1986 dodge d100?
The ballast resistor is located on the left inner fender.
Where is the ignition ballast resistor on a 1988 dodge Dakota 3.9?
A 1998 Dakota does not have a ballast resistor.
What is a ballast resistor?
A ballast resistor is an electrical resistor whose resistance varies with the current passing through it, thus maintaining a constant current.
What is the purpose of a ballast resistor in a car?
a ballast resistor drops voltage. In chrysler products it drops to six (6) volts.
Where is the ballast resistor located on a 1989 350 Dodge Van?
Usually against the firewall in the center It most liley does not have a ballast resistor.
Where is the ballast resister on the dodge sprinter motor home?
IT doesn't have a ballast resistor.
What causes the ballast resistor on 1972 Plymouth to get hot?
the ballast resistor is designed to turn unwanted current into heat high temperatures are normal.
Where is ballast resistor on Dodge Grand Caravan sport 2002?
It does not have a ballast resistor, those were used for ignition systems 30+ years ago. It does have a blower motor resistor that is located behind the glove box.It does not have a ballast resistor, those were used for ignition systems 30+ years ago. It does have a blower motor resistor that is located behind the glove box.
