It does not have a ballast resistor.
It does not have a ballast resistor.
It does not have a ballast resistor.
yes it has one and it is the porceloin block on the fire wall.
try changing the ballast resistor on the firewall, porceloin block with wires running to it.
Usually against the firewall in the center section
there is a porcelain block on the firewall called a ballast resistor that limits voltage to the starter and there is also the voltage regulator that regulates voltage to the battery.
It sounds like your ballast is malfunctioning. If it is a magnetic ballast it will probably have tar protruding out of it and the ballast will be very hot. Buy a new electronic ballast. Change the wiring to the end sockets like it is shown on the electronic ballast print that can be found on its label. You will need new tubes for the new ballast. Diameter will be T-8.
a ballast resistor drops voltage. In chrysler products it drops to six (6) volts.
It does not have an ignition ballast resistor.It does not have an ignition ballast resistor.
The ballast resistor is on the left side inner fender.
yes its located on the p/s firewall next to the ignition coil
A 1998 Dakota does not have a ballast resistor.
A 1994 Dodge Ram does not have a ballast resistor.
The ballast resistor is located on the left inner fender.
A ballast resistor is an electrical resistor whose resistance varies with the current passing through it, thus maintaining a constant current.
Usually against the firewall in the center It most liley does not have a ballast resistor.
IT doesn't have a ballast resistor.
the ballast resistor is designed to turn unwanted current into heat high temperatures are normal.
It does not have a ballast resistor, those were used for ignition systems 30+ years ago. It does have a blower motor resistor that is located behind the glove box.It does not have a ballast resistor, those were used for ignition systems 30+ years ago. It does have a blower motor resistor that is located behind the glove box.