From Wikipedia definition of IEEE 1394 Standard - "The IEEE 1394 interface is a serial bus interface standard for high-speed communications and isochronous real-time data transfer, frequently used by personal computers, as well as in digital audio, digital video, automotive, and aeronautics applications. The interface is also known by the brand names of FireWire(Apple), i.LINK (Sony), and Lynx (Texas Instruments). IEEE 1394 replaced parallel SCSI in many applications, because of lower implementation costs and a simplified, more adaptable cabling system. The 1394 standard also defines a backplane interface, though this is not as widely used."
No, the TR wire on a Robertshaw 7956-336P gas valve does not connect to the positive connection. The TR wire typically connects to the thermostat to control the valve's operation. The positive connection is for the main power supply to the valve.
No, you should not connect two wires to one lug that is only rated for one. This can lead to overheating and potentially cause a fire hazard. It is important to follow the manufacturer's guidelines for wire connection to ensure safety and proper functioning.
The main use of lead wire is as connection to an electric pole of an electronics component.
Black and Red are hot (2 slots ), white neutral , bare copper (or green) is grounding. The answer is correct, but to carify a bit...Red and black are connected to the brass colored terminals, white to silver and green or bare to the green terminal.
It is not recommended to splice solid copper wire with stranded copper wire as they have different properties and may lead to a poor connection. It is best to use a junction box or a suitable connector designed for connecting different wire types to ensure a secure and reliable connection.
Motorola and Pioneer both make DVRs with a firewire connection.
Only if you have a device which requires a connection through firewire
Windstream has always been 2 wire connection. They might be making a 4 wire connection but they do not have it out yet.
To convert a 4-wire 220V connection to a 3-wire 220V connection, you will need to remove the neutral wire and connect the ground wire to the neutral terminal. This diagram shows the proper wiring configuration for this conversion.
STAR connection is best suit for 3 phase 4 wire seviceas there is a neautral wire is there in this connection
Connection with using copper wire
a loose connection of a neutral wire
Fire wire was developed by Apple company.
For a dryer that requires a 220 wire connection, a 10-gauge wire with four conductors should be used.
the series connection is in one wire
On Fire - T-Connection album - was created in 1977.
no you need an internet connection with WiFi