0
What else can I help you with?
Which of the fixture in the house that is going to have the weakest flow and drainge is?
The fixture in a house that typically has the weakest flow and drainage is the bathtub. This is because it requires a larger volume of water to fill, which can strain the plumbing system and result in slower drainage compared to sinks or showers.
How many fixture unit is in 1.5 liters?
There is no answer as the units are incompatible and therefore not convertible. In plumbing, a Fixture Unit is equal to one cubic foot of water drained in an 1 1/4 pipe over one minute. A Fixture Unit is not a volume or a flow rate unit but a design factor.
Fixture unit per fixture equals 1.5 what does this mean?
A "fixture unit" is used to design the pipe sizes in a plumbing system. It does not equate directly to gallons because not all of the fixtures (aka sinks, toilets, tubs etc etc) will be "running" at the same time. Each fixture is assigned a "fixture unit" load by the local authority having jurisdiction (aka the local plumbing code). These are added to together and tables are used to determine the pipe size. EG, a typical bathroom sink is assigned 1.5SWFU (supply water Fixture units) and 1.5DFU (drainage fixture units) BUT a toilet might be 2.2SWFU and 4DFU.
Why is water low viscosity?
Water has low viscosity because its molecules are small and can move past each other easily. This allows water to flow smoothly and quickly. Additionally, water has weak intermolecular forces, which further reduces its resistance to flow, resulting in low viscosity.
Can a 12 2 low voltage line light up a 120 volt led light fixture?
What needs to be checked is the voltage of the low voltage line. If it is 120 v, that is suitable for a 120 v LED fitting. Second, is the line capable of carrying the current needed by the fixture. The answer to that is, probably, but it still needs checking.
What is the Flow rate of one fixture unit?
3 gpm
What is the use of overflow pipe?
To drain the over flow from a tank or fixture
How many fixture units is a ac?
What is the condendsate in GPM flow and what tonnage is the unit
Which of the fixture in the house that is going to have the weakest flow and drainge is?
The fixture in a house that typically has the weakest flow and drainage is the bathtub. This is because it requires a larger volume of water to fill, which can strain the plumbing system and result in slower drainage compared to sinks or showers.
For a low voltage light fixture can you use a 2-pole on-off-on switch on a center tapped secondary and leave the primary always hot?
Please clarify what you mean by low voltage light fixture. What voltage?
What is an angle stop used for?
It is used to shut off (isolate) the flow of water from a plumbing fixture.
How does an electric light switch work to control the flow of electricity to a light fixture?
An electric light switch works by interrupting or completing the circuit that allows electricity to flow to a light fixture. When the switch is turned on, it closes the circuit, allowing electricity to flow and the light to turn on. When the switch is turned off, it opens the circuit, cutting off the flow of electricity and turning the light off.
How does an electrical light switch work to control the flow of electricity to a light fixture?
An electrical light switch works by interrupting or completing the circuit that allows electricity to flow to a light fixture. When the switch is turned on, it closes the circuit, allowing electricity to flow and the light to turn on. When the switch is turned off, it opens the circuit, cutting off the flow of electricity and turning off the light.
How does the light switch controller work to regulate the flow of electricity to the light fixture?
The light switch controller works by interrupting or completing the circuit that allows electricity to flow to the light fixture. When the switch is turned on, it closes the circuit, allowing electricity to flow and the light to turn on. When the switch is turned off, it opens the circuit, cutting off the flow of electricity and turning off the light.
What is the purpose of a lamp socket in a lighting fixture?
The purpose of a lamp socket in a lighting fixture is to hold and connect the light bulb securely in place, allowing electricity to flow to the bulb and illuminate the room.
When is a genetic drift a major factor of evolution?
When there is low gene flow.
What is fixture unit?
A fixture is 7.48 gallons which is equal to 1 cubic foot of waterAlso a fixture unit in storm drainage is roughly 3 square feet depending on pitchTo convert sanitary /waste to storm fixture units for a combined system one has to do interpolation combining all the GPM flow expected from a 10 year frequency
