0
What else can I help you with?
How do you clean pipette?
First remove all the solid particles from the burette using a scrubber. Then wash the burette with tap water followed by distilled water thoroughly (even the nozzle). Then wash the burette with the solution to be used in the burette.
Why is it important to clean a burette?
It is important to remove the filter funnel before adjusting the level of the burette so as to prevent the residual drops of the reagent from dripping into the burette. Which can lead to inaccurate volume readings.
How do tighten burette clamp on?
To tighten a burette clamp, adjust the screw on the clamp to apply pressure on the burette. Turn the screw clockwise to securely hold the burette in place. Make sure the burette is held firmly but not over-tightened to avoid damaging the glassware.
Why is it advisable to remove sodium hydroxide from the burette as soon as possible after titration?
Sodium hydroxide, particularly highly concentrated sodium hydroxide, can dissolve glass if left sitting long enough. Therefore, if you leave the sodium hydroxide in the burette after finishing your titration, you could increase the volume inside the burette from the glass being dissolved from the inside out. This would make the burette measure the titration volume inaccurately and would invalidate the results of future titrations done with this instrument.
What is a burette?
A burette is a glass tube with fine gradations and a stopcock at the bottom, used in laboratory procedures for accurate fluid dispensing and titration.
What is the curved surface of water in a burette called?
The curved surface of water in a burette is called the meniscus. It is caused by the surface tension of the water interacting with the walls of the burette.
How do you clean pipette?
First remove all the solid particles from the burette using a scrubber. Then wash the burette with tap water followed by distilled water thoroughly (even the nozzle). Then wash the burette with the solution to be used in the burette.
What is the purpose rinsing the burette with distilled water during titration?
Rinsing the burette with distilled water helps to remove any impurities or residue that may be present inside the burette. This ensures that there are no contaminants that could affect the accuracy of the titration results.
Why rinse the burette with distilled water?
Rinsing the burette with distilled water helps to remove any impurities or contaminants that may be present in the burette, ensuring that the titrant being used in the titration is not contaminated. This helps to maintain the accuracy and precision of the titration results.
Why is water dripping out of my exhaust?
if a small amount of water is dripping it is normal condensation from running an engine
What is wrong if my air conditioner is not dripping water?
Your air conditioner may be faulty if it is not dripping water.
What is the most accurate way to measure volume?
using pycnometry because the density of water is very accurate
What is the meaning of the word dripping?
If something is "dripping", then it usually means that water is coming from it slowly and intermittently. For example, if a wet towel is hung on a rail, it would be "dripping" water.
Why is it important to clean a burette?
It is important to remove the filter funnel before adjusting the level of the burette so as to prevent the residual drops of the reagent from dripping into the burette. Which can lead to inaccurate volume readings.
Why is water dripping from your water pump?
Water leaking from the seal
Can pipes still freeze with water left dripping?
yes and if it is frosty and the water is left dripping you can also get ice forming in your drains.
Why is there water dripping from the shower faucet?
Water may be dripping from the shower faucet due to a worn-out or faulty washer or seal within the faucet mechanism, causing water to leak through. This can be fixed by replacing the washer or seal to stop the dripping.
