The temperature of ice water after stirring it for one minute will likely remain close to the original temperature, assuming no external heat source is applied. The stirring will help distribute the coldness of the ice throughout the water, but it won't significantly change the overall temperature in just one minute.
Ice water has a lower temperature than ice. Ice water is a mixture of ice and water at the temperature of 0 degrees Celsius, while ice is held at 0 degrees Celsius until it melts and transitions into water.
The temperature decrease and water can be transformed in ice.
the temperature of ice cubes are lower than the temperature of the water around them. The heat energy from the water is used up in the process of melting the ice, so the water temperature drops.
To determine the temperature change when 40g of ice is added to 100g of water at room temperature, you must consider the heat transfer involved in melting the ice and warming the resulting water. The heat absorbed by the ice to melt (latent heat of fusion) and then raise its temperature to the final equilibrium temperature will lead to a decrease in the temperature of the warm water. The final temperature will depend on the initial temperature of the water and the specific heat capacity of both water and ice, which typically results in a lower equilibrium temperature than the initial temperature of the water.
Ice is frozen water, while salt is a compound that typically exists as a crystalline solid at room temperature. When salt is added to water, it can lower the freezing point of the water, making it harder for the water to freeze into ice.
This depends upon temperature, pressure, stirring, area exposed to evaporation.
well this is because the temperature is very high, and on the other hand with ice water the temperature is very low. If you get an ice cube and put it in very hot water, it will melt in about a minute or two. Hope this helped! :)
record the temperature per minute as it melts
To cool water quickly, you can place it in the refrigerator or add ice cubes to it. Stirring the water can also help it cool faster by distributing the cold temperature more evenly.
Ice water has a lower temperature than ice. Ice water is a mixture of ice and water at the temperature of 0 degrees Celsius, while ice is held at 0 degrees Celsius until it melts and transitions into water.
No. The temperature of dry ice is far lower than that of ice water.
The depends on the mass of ice, stirring and other factors.
The temperature decrease and water can be transformed in ice.
Since the water is at a higher temperature than the ice, it transfers heat to the ice. This in turn raises the ice's temperature above its melting point of 32oF which turns the ice to water.
At standard pressure, pure water and ice are in equilibrium at zero Celsius.
the temperature of ice cubes are lower than the temperature of the water around them. The heat energy from the water is used up in the process of melting the ice, so the water temperature drops.
To accelerate the melting process of ice, you can increase the temperature of the ice by placing it in a warmer environment, such as a room temperature or under direct sunlight. You can also add substances like salt or sugar to the ice, which lowers the freezing point of water and speeds up the melting process. Stirring or crushing the ice can also help to increase the surface area and speed up melting.