0
In North America the common voltage for microwave ovens is 120 volts.
However, what you may really want to know is how many watts does it draw? (One doesn't "draw volts" - the voltage is fixed by the source of electricity: 110 - 120 volts from the wall recepticle in your house; 1 1/2 volts for a AA battery, etc.) However, appliances do "draw" wattage - that depends upon the appliance and how efficiently it operates. (watts = volts x amps (current). Most microwave ovens are about 50% efficient, so an 800 watt (output) microwave oven draws about 1600 watts of electricity.
What else can I help you with?
What is the current in a 1000 watt microwave?
To calculate the current in a 1000 watt microwave, you would need to know the voltage it operates on. Using the formula Power = Voltage x Current, you can rearrange it to find Current = Power / Voltage. For example, if the microwave operates on 120 volts, the current would be approximately 8.33 amps (1000 watts / 120 volts = 8.33 amps).
What will happen if 110 volt microwave plugged into a 220 volt circuit?
If a 110-volt microwave is plugged into a 220-volt circuit, it will likely be damaged due to receiving double the voltage it was designed for. This excess voltage can cause overheating, component failure, or even a fire hazard. It's important to use devices with the appropriate voltage or use a transformer to convert the voltage to the required level. Always check the voltage specifications before plugging in any appliance.
What is the power consumption rating on this microwave?
The rated voltage will match the supply voltage of your property (nominally 120 V in North America, and 230 V in Europe), but the rated power varies from microwave to microwave -you can find out by looking at the 'nameplate' data label which, by law, must be attached to your microwave. The rated current will be the rated power divided by the rated voltage.
What is used to measure voltage?
a voltmeter is used to measure voltage
How many amps are needed for a microwave?
Most household microwaves require around 10-12 amps to operate efficiently. It's recommended to use a dedicated circuit with a 15-20 amp breaker to ensure safe and proper functioning of the microwave.
What type of diode is a HVR-1X4 diode?
It's a high voltage diode, typically used in microwave ovens.
What is a Microwave Varistor?
A microwave varistor is a nonlinear electronic component that acts as a voltage-dependent resistor, specifically designed to protect microwave circuits from voltage surges and transient events. It exhibits a low resistance under normal operating conditions, allowing signals to pass through, but quickly increases resistance during voltage spikes, thereby diverting excess energy away from sensitive components. Commonly used in microwave communication systems and RF applications, microwave varistors help ensure the reliability and longevity of electronic devices by preventing damage from high-voltage transients.
What does a capacitor in a microwave oven do?
A capacitor in a microwave oven stores electrical energy and helps to supply power to the magnetron, which generates the microwave radiation used for cooking. It helps regulate the flow of electricity and maintain consistent power levels during operation.
How much power does a microwave oven use if it has a current of 5.8A and a voltage of 120V?
The power used by the microwave oven can be calculated using the formula P = I * V, where P is power, I is current, and V is voltage. In this case, the power used by the microwave oven would be 696 watts (P = 5.8 A * 120 V).
What is the voltage of microwave with a resistance of 5 ohms and current flowing of 10 amperes?
It looks as if you can use Ohm's Law to calculate this: V=IR (voltage = current x resistance).
Can you use a 220v-60hz microwave in Australia?
Yes, using a 220v-60hz microwave in Australia is fine. The voltage of alternating current supplied to homes in Australia is 220v. The frequency of the voltage is 50hz.
Can you give me examples of appliances at home with hertz and voltage?
microwave oven
Why microwave is not used in radar?
Microwave IS used in RADAR.
What is the current in a 1000 watt microwave?
To calculate the current in a 1000 watt microwave, you would need to know the voltage it operates on. Using the formula Power = Voltage x Current, you can rearrange it to find Current = Power / Voltage. For example, if the microwave operates on 120 volts, the current would be approximately 8.33 amps (1000 watts / 120 volts = 8.33 amps).
What does a transformer in a microwave oven do?
It outputs high voltage so that the magnetron (which is recieving the 2000v the Microwave transformer produces) can emit microwaves and it will cook the food but if fed lower voltage it is like a lower wattage it will cook slower
What microwave oven uses 1200 W of power The voltage source is 120 V What is the current flowing through the microwave?
To find the current flowing through the microwave, you can use the formula: Power (P) = Voltage (V) x Current (I). Given the power is 1200 W and voltage is 120 V, you can rearrange the formula to solve for current: I = P / V. Therefore, I = 1200 W / 120 V = 10 A. The current flowing through the microwave is 10 amps.
How was the microwave used when originally invented?
The Microwave was used to cook food.
