The Dark Green Wire should be the hot to the air compressor clutch and Black should be ground.
I am guessing that the dryer is 220-240 VAC as is the compressor. I also assume that the third wire on the dryer is a ground. You need to make sure that the metal chassis on the compressor is not connected to the two wires. You then need to create a covered junction box where you have the two existing wires and a ground wire that you connect to the compressor metal chassis with a screw type connector. Ground wire should be 10 AWG. Now you have three wires. Connect the two hot wires of supply to two original wires on compressor and ground wire to the chassis ground.
It could if you don't get the terminals and motor wires on the correct terminals.
Red is negavite some black
Identify the neutral wire on the generator. This will be the unused conductor to run the compressor. The ground and line1, line 2 are all that are needed.
In Bangladesh the color of live is green and neutral is blue and ground is black.
What color is the mute wire for 2004 chevy silverado?
Green is the hot wire for my 2004 Chevy Colorado.
PURPLE
black
what are the radio color codes for a2009 chevy impala
what are the stereo wire color codes for a 2002 Chevy impala LS
The 1996 Chevy Tahoe reverse wire is light blue. You can find the reverse wire inside of the steering column.
dark green
white if its tbi
Found out that I had an exposed wire lying on the arm of the gas pedal.
There will be no spark on a 1994 Chevy 1500 5.7 Suburban if no power is getting to the ignition system. This can occur from a damaged wire, loose connector, or failed component.
The red wire is the positive wire. The black wire is the ground wire. The green wire is speaker wire. The white wire is the auxiliary wire.