0
What else can I help you with?
What is the answer of the soft residue that remains after combustion?
The soft residue that remains after combustion is called ash. Ash is the inorganic material left behind when organic material (such as wood or paper) is burned.
What types of material can come out of a volcano?
Lava, ash, smoke, and rock
What is the name light coloured material produced when a volcano erupts?
Ash
What product is made out of sand ash and limestone?
Concrete is made out of sand, ash, and limestone. Sand provides the bulk of the material, ash or fly ash acts as a binder, and limestone is used as a filler to enhance the properties of the concrete.
Which residue is remaining when something is burned?
When something is burned, the residue that remains is typically ash, which is primarily composed of inorganic minerals and compounds left over after the organic material has combusted. The specific composition of the ash depends on the material being burned; for example, wood ash contains calcium, potassium, and magnesium, while the ash from other materials may have different mineral content. This residual ash may also contain unburned carbon if the combustion process was incomplete.
What is the difference between sulphated ash and residue on ignition?
The only difference between sulphated ash and the residue on ignition is the terminology. The residue on an ignition is sulphated ash.
Why add sulphuric acid in sulphated ash?
Sulfuric acid is added in the process of determining sulphated ash to help decompose organic matter present in the sample to ensure complete combustion. This is important to accurately measure the inorganic residue left behind, which is the sulphated ash content.
What is difference between sulphated ash and residue on ignition?
Sulphated ash is the amount of inorganic residue left when a sample is ignited after treatment with sulfuric acid. On the other hand, residue on ignition is the amount of material left behind when a sample is ignited without any prior treatment. Sulphated ash is typically used for organic materials, while residue on ignition is often used for inorganic materials.
What is difference between sulphated ash and heavy metal?
Not so important differences: Heavy metal ash (but also in general ash): ash resulting from the calcination of a material; practically is a mixture of oxides. Sulphated ash: the sample is initially treated with sulphuric acid and the residues are calcined.
Why used sulfuric acid in sulphated ash test?
Sulfuric acid is used in the sulphated ash test to convert the inorganic components present in the sample to their sulfates. This step helps in ensuring complete combustion of organic material and facilitates the determination of the ash content accurately. The use of sulfuric acid also helps in removing any carbon residues that may be present in the sample.
What is sulphated ash?
The sulphated ash test is an analytical test for determining the inorganic content of a sample by weight. The sample ( usually 1g) is accurately weighed into a platinum, silica crucible that has been previously ignited, cooled and weighed. The sample in the crucible is then subjected to sulphuric acid (usually 1mL) and charred at a low temperature without causing ignition of the sample until there are no more white fumes given off. The crucible with the charred sample is then placed in a furnace (temperature is dependent on monograph but typically it can be from 600 to 900 degrees celcius) until all organic matter has been burnt off. The crucible is cooled and re-weighed. The difference in sample weights being the sulphated ash content remaining. Some monographs require the sample to be re-ashed until a constand weight has been achieved. The remaining inorganic matter is typically metal oxides from most samples.
What is constant weight during sulphated ash test?
During the sulphated ash test, constant weight refers to achieving a stable mass of the sample after it has been ignited to remove any organic material and drive off volatile substances. This step ensures that all organic components have been effectively burned off, leaving behind only the inorganic residues for accurate measurement. Constant weight indicates that the sample has reached a point where no further change in mass occurs, confirming complete combustion.
Natural bow material?
Ash or Yew.
What is the weight of ash?
The weight of ash can vary depending on factors such as the type of material burned and the temperature of combustion. However, on average, ash can weigh between 10-30% of the original material's weight.
What is the formula of ash?
Generally ash is a mixture of oxides and silicates; the composition depends on the burned material.
What is is volcanic material or burnt out fuel wood?
Ash
Why do burning anything changes into ash?
Not anything; ash is formed only from non-combustible components of a material.
