You can go RCA remote codes at RCA.comm. or something like that.Match you model or part number or picture. 1. Manually turn on the component you want the remote to control. 2. Locate the codes for your brand in the code list. 3. Press and hold the component key you wish to program. The ON-OFF key turns on and stays on. 4. While holding the component key down, enter your first four-digit code. After the first number is pressed the ON-OFF key will turn off. When the fourth number is entered the ON-OFF key turns back on. 5. Release the component key. If the ON-OFF turns off, you have enter the correct code. No, wrong code? If the ON-OFF light blinks 4 times it is the wrong code. Repeat the process. **Some TV codes** JVC 1012, 1028, 1029, 1051, 1054, 1065, 1080, 1096 Magnavox 1004, 1006, 1008, 1019, 1036, 1041, 1044 Motorola 1003, 1092 Phillips 1003, 1004, 1008, 1012, 1019, 1021, 1019, 1021, 1031, 1036, 1041, 1044, 1059, 1062, 1075, 1087, 1089, 1094, 1102, 1103, 1110 RCA 1000, 1003, 1004, 1005, 1006, 1019, 1053, 1054, 1056, 1057, 1060, 1076, 1077, 1079, 1082, 1089, 1098, 1112 Samsung 1004, 1005, 1006, 1007, 1012, 1015, 1019, 1030, 1035, 1039, 1066, 1082, 1089, 1093, 1104, 1114 Sharp 1004, 1006, 1010, 1012, 1013, 1040, 1061, 1089, 1092, 1093, 1111 Sony 1002, 1017, 1069, 1074, 1088, 1108
Use the set button just below the volume down key
You should not have to program this remote.... although it says universal on it. This is an original remote and should work when you put the batteries in. For T.V viewing, just push the t.v button on the top of the remote then power/on-off .... wait for the light, then the sound, then begin with your normal activities.
I want to tell you what just worked for me... 1. Turn the component on that you want to program 2. Press and hold that component key (TV, VCR/DVD, or SAT/CBL) on your remote 3.Press ON/OFF button until your unit turns off. 4. Press Stop button to program the "code" that you remote found to work your component.
1. The Title bar gives the name of the document and the program being used 2. On the right side of the Title bar are three buttons. a. The Minimize button makes the window disappear from the screen without closing the program. You can bring the window back by clicking on its button on the Task bar at the bottom of the screen. b. The Reduce/Maximize button makes the window smaller or takes it back to full size. c. The Close button closes the document or program. 3. The Menu bar offers dropdown menus for things you do in Microsoft Word. 4. The Toolbars display icons that perform specific tasks when clicked. Often the toolbar icon performs the task without offering any options. 5. The Rulers display the tabs, indents, margins and give the user a visual guide for alignment. a. Tabs are set on the ruler by clicking the spot on the ruler where you want to the tab to start. Different Tab settings can be used to align text, decimals and indents. b. Indents and margins can be set with the handles. 6. The Document display window is where the current document is visible. 7. The Scroll bars allow the user to move up and down the document in the window. 8. The Status bar shows the location of the cursor, number of pages and includes advanced toolbar options. 9. The Task bar displays buttons for Open programs or documents. Clicking on a button on the taskbar, brings that program into view. The current program button looks indented.
how to program my tv with the RCA D 770 - universal remote control which has no code search button
Hold the button you want to program and then hold the on/off button at the same time it should program
what are some of the codes for decibel universal remote
To program a Symphonic TV with an RCA RCR-612 universal remote, there are four codes which you can try. Those codes are 1033, 1038, 1046, and 1047. To try the codes, press and hold the TV button on the universal remote. After you enter the fourth digit, the power light will turn on. Once the light is on, release the TV key. If the power light turns off, you have the correct code and can now use the remote. If the light blinks, it isn't the right code and you need to repeat the procedure until you find the right code for your particular TV.
there is no cable button on this remote what do i push to hook cable its says hit cable button
You need to have a Code search button or at least have a list of codes. You can call the manufacturer for a list or a book. Look for a phone number and you will be able to get some help with this problem.
To program a GPT universal remote control, hold down the power button at the same time with the button for the device that is going to be programmed. When the other buttons on the remote blink, let up and press on the power button again. The device should turn on. If not, repeat the process.
This unit is basically the same as the D770 universal remote. You can download instructions from RCA at RCA.COM. The Only difference is there is no light below the ON/OFF button, the individual buttons will light, and when you hold down the device key and the on/off together all lights will come on.
hold down device button when entering the 4 digit key
You can program your GE universal remote, to your converter box, by holding the power button in until the auxiliary read lights aluminate red. Select auxiliary and input the proper code.