That's Ohm's law. Volts = Current (or Amps) * Resistance.
http://en.wikipedia.org/wiki/Ohms_law
In an electrical circuit, current is the flow of electric charge, voltage is the force that drives the current, and resistance is the opposition to the flow of current. According to Ohm's Law, the relationship between current (I), voltage (V), and resistance (R) is given by the equation V I R, where voltage equals current multiplied by resistance.
The current through the wire can be calculated using Ohm's Law, which states that current (I) equals voltage (V) divided by resistance (R). In this case, the current would be 90 volts divided by 30 ohms, which equals 3 amperes.
In an electrical circuit, current is directly proportional to voltage and inversely proportional to resistance. This relationship is described by Ohm's Law, which states that current (I) equals voltage (V) divided by resistance (R), or I V/R.
-- Connect a source of known, small voltage across the ends of the unknown resistance. -- Measure the resulting current through the unknown resistance. -- Divide (small known voltage)/(measured current). The quotient is the formerly unknown resistance.
The resistance can be calculated using Ohm's Law, which states that resistance (R) equals voltage (V) divided by current (I). In this case, R = 12V / 5A = 2.4 ohms.
Ohm's Law: Voltage equals Resistance times Current Given any two, you can figure out the other using simple algebra.
E=IR is Ohm's Law. Electromotive Force equals current times resistance. It is the fundamental equation of electronicalism.
The power dissipated across a resistor, or any device for that matter, is watts, or voltage times current. If you don't know one of voltage or current, you can calculate it from Ohm's law: voltage equals resistance times current. So; if you know voltage and current, power is voltage times current; if you know voltage and resistance, watts is voltage squared divided by resistance; and if you know current and resistance, watts is current squared times resistance.
Ohm's law: voltage is current times resistance. Restating this; current is voltage divided by resistance, so increasing resistance would decrease current.
Ohms law states that E=I * R, or voltage equals current times resistance. Therefore current equals voltage divided by resistance. 120v divided by 16 ohms equals 7.5 amps.
It usually represents current in amps as in the equation V=IR (volts equals current times resistance)
Ohm's law: voltage is current times resistance 0.03 amperes times 1000 ohms = 30 volts.
It depends on the current going through it. Ohm's law: Voltage equals current times resistance.
If resistance is increased, current decreases. Ohm's Law: current equals voltage divided by resistance.
If resistance is increased, current decreases. Ohm's Law: current equals voltage divided by resistance.
If resistance is increased, current decreases. Ohm's Law: current equals voltage divided by resistance.
Ohm's law: Voltage equals current times resistance. 8 amperes times 24 ohms equals 192 volts.