What is scotts edgeguard setting for hi yield turf and ornamental weed and grass stopper?

What is the grub ex spreader setting with scotts drop spreader?

Spreader settings for Scotts manufactured spreaders are listed on the back of the bag.

What is the conversion from the K 1-2 setting on a Scotts commercial spreader to the Scotts residential spreader?

Unfortunately, there is no conversion. The spreaders are calibrated differently.

What is the scotts standard broadcast spreader setting for vigoro fertilizer?

If you are using the Vigoro Ultra Turf Lawn Fertilizer(29-0-4) with the Scotts Standard Broadcast Spreader then the setting would be 5.

What is the K setting on a Scotts R8A spreader converted to on a Scotts Speedy Green spreader?

The K setting on a Scotts R8A spreader corresponds to a specific rate of application for granular materials. For a Scotts Speedy Green spreader, the equivalent setting can vary, but generally, you can use a conversion chart to find the closest match. Typically, the K setting on the R8A might translate to a setting around 4-5 on the Speedy Green, but it's always best to refer to the manufacturer's conversion guide for precise adjustments based on the material being spread.

What setting for a scotts spreader for grass seed?

What is the Ortho Spreader 5000 for overseeding

What are the settings for EZ republic spreader for scotts southern lawn?

The spreader setting for Scotts Southern Turf Builder when using the EZ Broadcast spreader by Republic is 3.5. If you are using the EZ Drop Spreader by Republic the spreader setting is 6.5.

Setting for scott's rotary spreader of 13-13-13 fertilizer?

Setting for scotts rotary spreader of 13-13-13 fertilizer?

Scotts turf builder plus with weed controlwhat is the setting when using the speedy green 2000?

You would want to use spreader setting 3.25

What is the Scotts 2000 setting for liming lawns?

While it is not exact these settings will provide a general guide when applying powdered or pelletized lime using most Scotts Spreaders. Please note we always suggest testing the pH level prior to an application of lime, to ensure that it would be reuqired and it takes roughly 40#-50# per 1,000 sq ft of lime to change the pH of the soil 1 level. and it can take up to 6 months for the change to occur in the soil.Turf Builder Drop Spreaders/AccuGreen/Scotts metal drop (including PF models) spreader:10# per 1000 sq. ft. - Setting of 11.530# per 1000 sq. ft. - Setting of 1240# per 1000 sq. ft. - Setting of 15.550# per 1000 sq. ft. - Setting of 17.5Basic/Turf BuilderDeluxe/Turf BuilderEdgeGuard (Mini and DLX)/Standard/LP Standard/SpeedyGreen/EdgeGuard:30# per 1000 sq. ft. - Setting of 1040# per 1000 sq. ft. - Setting of 7.5, go over the area twice50# per 1000 sq. ft. - Setting of 7, go over the area three timesEasyGreen spreader:10# - Setting of 2830# - Setting of 27, go over the area three times40# - Setting of 27, go over the area four times50# - Setting of 27, go over the area five times

What setting is used for lime with scotts 2000 drop spreader?

While it is not exact these settings will provide a general guide when applying powdered or pelletized lime using most Scotts Spreaders. Please note we always suggest testing the pH level prior to an application of lime, to ensure that it would be reuqired and it takes roughly 40#-50# per 1,000 sq ft of lime to change the pH of the soil 1 level. and it can take up to 6 months for the change to occur in the soil.Turf Builder Drop Spreaders/AccuGreen/Scotts metal drop (including PF models) spreader:10# per 1000 sq. ft. - Setting of 11.530# per 1000 sq. ft. - Setting of 1240# per 1000 sq. ft. - Setting of 15.550# per 1000 sq. ft. - Setting of 17.5Basic/Turf BuilderDeluxe/Turf BuilderEdgeGuard (Mini and DLX)/Standard/LP Standard/SpeedyGreen/EdgeGuard:30# per 1000 sq. ft. - Setting of 1040# per 1000 sq. ft. - Setting of 7.5, go over the area twice50# per 1000 sq. ft. - Setting of 7, go over the area three timesEasyGreen spreader:10# - Setting of 2830# - Setting of 27, go over the area three times40# - Setting of 27, go over the area four times50# - Setting of 27, go over the area five times

What setting on scotts edge guard for pellet lime?

While it is not exact these settings will provide a general guide when applying powdered or pelletized lime using most Scotts Spreaders. Please note we always suggest testing the pH level prior to an application of lime, to ensure that it would be reuqired and it takes roughly 40#-50# per 1,000 sq ft of lime to change the pH of the soil 1 level. and it can take up to 6 months for the change to occur in the soil.Turf Builder Drop Spreaders/AccuGreen/Scotts metal drop (including PF models) spreader:10# per 1000 sq. ft. - Setting of 11.530# per 1000 sq. ft. - Setting of 1240# per 1000 sq. ft. - Setting of 15.550# per 1000 sq. ft. - Setting of 17.5Basic/Turf BuilderDeluxe/Turf BuilderEdgeGuard (Mini and DLX)/Standard/LP Standard/SpeedyGreen/EdgeGuard:30# per 1000 sq. ft. - Setting of 1040# per 1000 sq. ft. - Setting of 7.5, go over the area twice50# per 1000 sq. ft. - Setting of 7, go over the area three timesEasyGreen spreader:10# - Setting of 2830# - Setting of 27, go over the area three times40# - Setting of 27, go over the area four times50# - Setting of 27, go over the area five times

What are the settings for earth way broadcast spreader for scotts turf builder plus 2?

For the Earthway broadcast spreader, you can set it to a setting of around 3.5 to apply Scotts Turf Builder Plus 2 accurately. It's recommended to start at a lower setting and adjust as needed based on the size of the particles in the fertilizer and the coverage you desire. Always refer to the Scotts Turf Builder packaging for specific application instructions.