Chevrolet

Lean Condition caused by bad or restricted injectors

From $1,160 for a Business Coupe to $1,893 for a 4 door 8 passenger wagon.

May have a bad water pump, otherwise make sure your coolant system has pressure. this can cause over heating.

depends on the v8 and the transmission really, but it is not a good idea. v6 tranny was not meant for the torque and horsepower of a v8.

the equinox is made in ingersoll Ontario Canada in a plant called cami my dad works there :D

RPM stand for Revolutions per Minute and relates to the frequency in which the crankshaft is turning inside of the engine. The crankshaft turns as long as the engine is running and when the engines runs faster the RPM will also increase. As the car increases speed to change gears the engine will increase RPM until it is ready for the next gear. Just like on your bicycle when you shift up or down your leg rotation speed changes in direct proportion to how hard it is to pedal.

Roger Zelazny bought the painting and it is not online (I have never seen a print of it and I do not have one). As far as I know his family still has it.
Polly Jackson

There is an OEM speed limiter of 95mph. The stock gearing of 3.73 could take the Duramax to ~140mph depending on RPM.

Ebay Motors is a good place to look. There are many sites online. Search with Google using the term "1953 Chevy Parts".

On a 1994 Chevy C1500 5.0 V8 it is the top valve with a black cover next to the coolant resivoir

alignment and balancing

Try to find an '82 or '83 service manual. A Chevy or GMC manual will have the diagram you need. Check eBay they show up regularly.

Unless the fan clutch is bad just remove it with the water pump. Otherwise it is a 36mm fan clutch wrench that most auto parts stores have for rent.

1962 was the year the 327 was introduced.

How do I cheak a noisey wheel bearing on a all wheel drive 08 chev equinox

If nothing else you can check the stroke. The 283 had a Bore & Stroke of:3.875 in × 3.00 in The 327 had a Bore & Stroke of: 4.000 in × 3.25 in Remove a Spark Plug and check the stroke. There is also a casting number located on the block that can be used to identify the block. Click the link.

I get around 11 mpg's right now on my 2002 but it all depends on how well it's been taken care of, how many miles are on it, driving conditions, quality of the diesel (winter-blend, old, new), etc.

Need to know the engine size.

There used to be a company called Clifford Research, that made parts for 6 cylinder inline motors, only. They can help with the 235. I will tell you this, too. The 235 in that year, put out a bit more HP, as an automatic, version, over the stick shift model. You may want to modify the suspension, as well. Art Morrison, in Washington state, has a specialty line for your rig, as well.

The manual calls for a 10w30 motor oil. Just any 10w30 motor oil will work depending on your preference of brand.

how do you hook up a manuel choke on a small block chevy

what causes misfire cyliner 7 2008 53

The owners manual shows 10w30 or 10w40 oil.

It's a sideways facing engine so the oil pan is just off center toward the passenger side. The drain valve is rear of the pan. The filter is on top under a large black plastic cap. The socket size is 1-1/4" only loosen the cap with the socket careful not to wedge the socket against the manifold.

Light Blue but I cannot tell you the exact color blue.