answersLogoWhite

0

🎒

Area

Area is a quantity expressing the two-dimensional size of a defined part of a surface; typically a region bounded by a closed curve. This category includes questions related to the formula for calculating the Area of a surface or how to determine the Area of a surface.

30,791 Questions

How many BTU to heat 600 sq ft?

To heat a 600 square foot space, you'll typically need about 30 to 60 BTUs per square foot, depending on factors like insulation, ceiling height, and climate. This means you'll require approximately 18,000 to 36,000 BTUs to adequately heat the area. It's best to perform a specific heat load calculation for more accurate requirements tailored to your situation.

What is the area of 10m and 3m?

To find the area of a rectangle, you multiply its length by its width. In this case, if one side is 10 meters and the other is 3 meters, the area would be 10 m × 3 m = 30 square meters. Thus, the area is 30 m².

How many cassava cuttings for a hectare of land?

For planting cassava, you typically need about 10,000 to 15,000 cuttings per hectare, depending on the planting density and variety. Each cutting should be approximately 20-30 cm long, and the spacing between rows and plants can vary based on local practices and soil conditions. It's essential to consider these factors to optimize growth and yield.

In what area of Europe were the majority of Warsaw pact countries?

The majority of Warsaw Pact countries were located in Central and Eastern Europe. Key members included Poland, Czechoslovakia, Hungary, Romania, Bulgaria, and East Germany, which were all part of the Eastern Bloc during the Cold War. These nations were aligned with the Soviet Union and operated under communist governments, forming a military alliance in response to NATO.

Who plays Marla on Private Practice?

Marla is played by actress Shonda Rhimes in the television series "Private Practice." The character is introduced as a recurring role in the show's later seasons. Rhimes is also the creator of "Private Practice," a spin-off of "Grey's Anatomy."

How many katha makes 1 bigha?

In the context of land measurement in South Asia, particularly in regions like Assam and Bihar, 1 bigha is typically equivalent to 20 katha. However, the exact conversion can vary by region, as different states may have different definitions for bigha. It's important to check local standards for precise conversions.

What is the meaning of plinth area?

Plinth area refers to the total area of a building measured at the floor level of the building's exterior walls. It includes all covered spaces, such as rooms, halls, and corridors, but typically excludes areas like balconies and open terraces. The plinth area is often used in real estate and construction to determine the floor space for various purposes, including pricing, valuation, and building regulations. It serves as a key metric in assessing the size and capacity of a structure.

What is the surface area of the sphereA. 364.05 mi2 B. 125.64 mi2 C. 314.16 mi2 D. 242.68 mi2?

To calculate the surface area of a sphere, you can use the formula (4\pi r^2), where (r) is the radius. However, without the radius or diameter provided, it’s impossible to determine which option corresponds to the correct surface area. Please provide the radius or diameter of the sphere for an accurate calculation.

How kgs of beans can be harvested in acre of land?

The yield of beans per acre can vary significantly depending on the type of bean, farming practices, and environmental conditions. On average, dry beans can produce about 1,200 to 2,000 kilograms per acre. However, certain high-yielding varieties and optimal farming conditions can lead to harvests exceeding 3,000 kilograms per acre. It's essential to consider local agricultural practices and climate for more accurate estimates.

If a room is 20X60 how many square feet is it?

To calculate the area of a room, you multiply its length by its width. For a room that is 20 feet by 60 feet, the area is 20 x 60 = 1,200 square feet. Therefore, the room has an area of 1,200 square feet.

How many bags of sand for 64 square feet?

To determine how many bags of sand are needed for 64 square feet, you first need to know the depth of sand you plan to apply. For example, if you're applying a 1-inch depth, you would need about 0.5 cubic yards of sand, which translates to approximately 13-14 bags (assuming each bag is 0.5 cubic feet). Adjust the number of bags based on the desired depth and the size of the bags. Always check the specific bag dimensions and coverage information for more accurate calculations.

How many sheets of ply do you need for 50 square meters?

To determine how many sheets of plywood you need for 50 square meters, first check the dimensions of the plywood sheets, which are typically 1.22 meters by 2.44 meters (or 3.2 feet by 8 feet), equating to about 2.97 square meters per sheet. Divide the total area (50 square meters) by the area of one sheet (approximately 2.97 square meters). This calculation shows that you would need about 17 sheets of plywood, assuming no waste or cuts. Always consider purchasing a few extra sheets to account for mistakes or future repairs.

How many squarefeets for one cent?

One cent is equal to 40.47 square feet. This measurement is commonly used in real estate and land measurement, particularly in regions like India.

What is the sq footage of 15x13?

To calculate the square footage of a space that is 15 feet by 13 feet, you multiply the length by the width. So, 15 feet × 13 feet equals 195 square feet. Therefore, the square footage of a 15x13 area is 195 square feet.

How many sq. yards are in a 20x20 room?

To find the area of a 20x20 room in square yards, first calculate the area in square feet: 20 feet × 20 feet = 400 square feet. Since there are 9 square feet in a square yard, divide by 9: 400 ÷ 9 ≈ 44.44 square yards. Therefore, a 20x20 room is approximately 44.44 square yards.

How much karmex per acre in ponds?

The application rate of Karmex (diuron) for aquatic use varies depending on the specific management goals and the target species. Generally, rates can range from 1 to 5 pounds per acre, but it’s essential to follow local regulations and guidelines. Always consult the product label and local agricultural extension services for precise recommendations tailored to your specific pond conditions.

Which schools are closed in the driffield area?

I don't have real-time information on school closures. To find out which schools are closed in the Driffield area, I recommend checking the local council's website or contacting the schools directly for the most accurate and up-to-date information. Local news outlets may also provide updates on school closures.

What is this answerA store was sold for 26500. 20000 was paid in cash and the remainder was paid for with land valued at 50 an acre. How many acres of land were received?

To find out how many acres of land were received, first determine the amount paid with land. The total sale price is $26,500, and $20,000 was paid in cash, leaving $6,500 to be paid with land. Given that the land is valued at $50 an acre, divide $6,500 by $50 per acre, resulting in 130 acres of land received.

How big is 3cubic feet?

Three cubic feet is a volume measurement equivalent to a cube that measures one foot on each side. To visualize it, imagine a box that holds the same amount of space as three standard-sized basketballs. In terms of everyday objects, it can hold about 24 cans of soda. This volume measurement is commonly used to describe storage containers, appliances, and other items.

How many square feet per person for a auditorium lobby?

The recommended space for an auditorium lobby typically ranges from 10 to 15 square feet per person. This allows for comfortable circulation, queuing, and social interaction before and after events. Factors such as the specific design, intended use, and local building codes can influence this number. It's important to assess the expected crowd size and activities to determine the appropriate lobby size.

How many square ft in 60x80?

To calculate the area in square feet for a rectangle measuring 60 feet by 80 feet, you multiply the length by the width. Therefore, 60 feet x 80 feet equals 4,800 square feet.

How many square feet in a room that is 12.5' X 11.5'?

To find the area of a room, multiply its length by its width. For a room that is 12.5 feet by 11.5 feet, the area is 12.5 x 11.5, which equals 143.75 square feet. Therefore, the room is 143.75 square feet in size.

How many bugs per acre?

The number of bugs per acre can vary widely depending on the ecosystem, time of year, and specific type of insects being considered. For example, agricultural fields may have an average of 1,000 to 10,000 insects per square meter, translating to millions per acre. In natural habitats, this number can be even higher due to the diversity of species and environmental conditions. Overall, it’s essential to specify the type of bugs and the environment to provide a more accurate estimate.

Who evolutionary ecologist conservationist and naturalist who conceived Area de Conservacion Guanacaste is?

The evolutionary ecologist, conservationist, and naturalist who conceived the Área de Conservación Guanacaste (ACG) is Dr. Daniel Janzen. He is renowned for his work in tropical ecology and conservation, particularly in Costa Rica, where ACG serves as a model for innovative conservation strategies and the restoration of ecosystems. His efforts have significantly contributed to the preservation of biodiversity in the region.

How many linear feet is 350 square feet?

To determine the linear feet from square feet, you need to know the width of the area. If, for example, the width is 10 feet, you would divide 350 square feet by 10 feet, resulting in 35 linear feet. The formula is Linear Feet = Square Feet ÷ Width. Without knowing the width, you can't calculate the linear feet.