Area

There is not enough information to tell. If you have the length of a wall, and the area being measured is rectangular, then you can find the length of the other wall by dividing the other wall's length into 570,025.

Ten square miles is a square that is ten miles long and ten miles wide. If you walked across it in a straight line you would walk ten miles, if you walked the perimeter of it (all the way around all four sides) you would walk forty miles.

<><><>

Sorry- disagree. 10 miles long and 10 miles wide is 100 square miles.

7500square meters is 0.0075square km

The answer depends on the units used for the measurements given in the question.

well.... i walked it today and it was a pretty long walk all around. if you are talking about Florida, then you have to include island of adventures, which probably adds another..... 20 square miles. so its really big and large too!

2,787.1 cm²

Algebraic Steps / Dimensional Analysis Formula 3 ft²*144 in²

1 ft²*6.4516 cm²

1 in²=2,787.0912 cm²

Direct Conversion Formula 3 ft²*929.0304 cm²

1 ft²=2,787.0912 cm²

1 Let each side be s

2 If: 0.5*s2*sin(60) = 692.820323 square cm

3 Then: s = square root of (692.820323*2)/sin(60) = 40 cm

4 Perimeter: 3*40 = 120 cm

None. An inch is a measure of distance or length, whereas a square foot is a measure of area. The two measure different things and, according to the basic principles of dimensional analysis, conversion from one to the other is not valid.

Multiply the cubic metres by 35.315 to get cubic feet.

3 square feet.

This is not a valid conversion. Cubic units is a measure of volume while square units is a measure of area.

An acer is a type of tree (of the same family as the maple) and the length of rope required to go around it depends on the shape of its trunk! Unless, of course, the rope is required to go around at a specific height.

If, instead of acer you meant an acre, the question has no answer, because a square acre is a measure in 4-dimensional hyperspace.

625 square feet.

Exactly 9 of them will.

13.1 * 36.6 = 479.46 metres2

13 x 8.25 = 107.25 square feet

200 m = 218.722 yd

A square meter is a meter multiplied times itself.

A meter is 100 centimeters, so . . .

100 x 100 = 10000

Very simple really that's bollocks

15x3

Area = 3x15=45

Perimeter = 3+3+15+15 = 36

This is solved algebraically by substituting the value of the length in terms of the width

2L + 2W = 36

L = 18-W

L x W = 45 and (18-W) x W = 45

gives the equation

W2+18W-45 = 0

(W-15)(W-3) = 0 and the width and length are 15 and 3

The question does not make any sense.

Cubic meters is a measurement of volume. Square feet is a measurement of area.

Think of a box. A cubic meter would be used to describe how much you can fit inside the box. A square foot would be used to describe how big one side of the box is.

One square yard is nine square feet, 3*3, so there are eighteen square feet in two square yards.

Area= base x height