Why are bridges placed on rollers?
when we have rollers at one end then it is allowed to expand freely without any thermal stress.in summers the bridges may expand due to the increase in the temperature and in winters the bridges may compress due to decrease in the temperature. the rollers help to increase/decrease the length of the bridge without any thermal stress.
----N.Doraditya
Which type of bridge can span the longest distance?
The Suspension bridge is usually the longest type of bridge in the world. That's the bridge that has two tall towers, and cables linking the towers, and from the cables are wires that hold up the bridge. The Golden Gate Bridge in San Francisco, CA is a famous suspension bridge.
Why one end of a steel girder bridge not fixed?
Most bridges have one fixed end and a rolling-end; this is because the rolling end is to compensate and accommodate expansion and contraction of the bridge without causing any distress to the structure and material. The end that is fixed is needed to control the movements on the bridge; travelling vehicle(s) etc.
Chatkrit S.
What is the length of the English channel tunnel?
The Channel Tunnel connects the United Kingdom and France. It runs between Folkestone in Kent and Sangatte near Calais in Pas-de-Calais.
You have two options. You can take a high speed passenger train, or you can take put your car one of the vehicle transporting trains
A train takes approximately 25 minutes to go through the Channel Tunnel.
The Eurotunnel Shuttle is the brand name for the car carrying trains which run through the Channel Tunnel between Folkestone and Calais.
Eurostar is the brand name of the company running high speed trains London-Paris and London-Lille-Brussels through the Channel Tunnel.
Eurostar uses the stations: St. Pancras (London), Gare du Nord (Paris), Bruxelles Midi (Brussels) and Lille Europe.
Currently these are the only passenger trains operating through the tunnel.
The Eurostar takes 2 hours 15 minutes between London and Paris. There is approximately one train per hour in each direction.
How can you make a bridge out of paper and tape?
First, construct three cuboids out of the paper. If you find this too difficult, you can simply just cut a huge pile of paper the same size and stack them together. Don't forget to seal it with tape! (Make 3 stacks)Lastly, put them all together. Done!
What three bridges connect Brooklyn to Manhattan?
Brooklyn Bridge, Manhattan Bridge, Williamsburg bridge
How much did Robert F Kennedy Bridge cost to build?
On the Robert F. Kennedy Bridge (aka the Triborough or Triboro Bridge) the current (as of December 30, 2010) toll for cars is $6.50 cash (without E-ZPass) and $4.80 with E-ZPass.
For toll prices for other vehicles, see the Related Link below.
Why was the Sutong Bridge built?
Major cities and most of the population are located in the south shore of the Yangtze River and the deep sea port such as NanTong is located in the north.
There are many challenges to build bridges across the mouth of Yangtze river.
- The river gets wider, deeper (30m for one of the main Pier)
- Since the shipping traffic is extremely heavy with ocean liner, the bridge span and height require is very high.
- The soft silty sand and clay settlement is very thick above the rock bed.
- The bridge not only have to withstand the worst downstream flow which is one of the heaviest in the world but also annual upstream salt water oceanic tide (silver serpent) which can be as bad as a Tsunami.
This is one of the many Bridges and tunnel build across this river in the last five or ten years which will shorten travel time by 75% and promote faster growth on the north shore. Why now? Because they can now overcome the technical challenge, to balance growth in different region and the fast economic growth required more efficient mode of transportation and provided required funding of such major project.
How are bridge able to hold a tremendous amount of weight?
The bridge doesn't simply 'sit' on the edges of the river. There are solid foundations that have been dug deep into the Earth. Additionally, there is a weight-limit for vehicles travelling over the bridge - of 18 metric tonnes.
What is the name of the channel tunnel from London to Paris?
The Channel Tunnel is called the Channel Tunnel!
The Channel Tunnel connects the United Kingdom and France. It runs between Folkestone in Kent and Sangatte near Calais in Pas-de-Calais (not London to Paris!).
You have two options. You can take a high speed passenger train, or you can take put your car one of the vehicle transporting trains.
A train takes approximately 25 minutes to go through the Channel Tunnel.
The Eurotunnel Shuttle is the brand name for the car carrying trains which run through the Channel Tunnel between Folkestone and Calais.
Eurostar is the brand name of the company running high speed trains London-Paris and London-Lille-Brussels through the Channel Tunnel.
Eurostar uses the stations: St. Pancras (London), Gare du Nord (Paris), Bruxelles Midi (Brussels) and Lille Europe.
Currently these are the only passenger trains operating through the tunnel.
The Eurostar takes 2 hours 15 minutes between London and Paris. There is approximately one train per hour in each direction.
You know the land disappear every winter or more only God knows. They reacted weirdly
How many miles is the George Washington bridge?
From the Golden Gate Bridge it is a long way. From London Bridge it is a long way. From the Sydney Harbor Bridge it is a long way. From the Galata Bridge it is a long way. It must depend on where you start from.
Why are people worried about the corrision of steel in concrete bridges and buildings?
Because the steel reinforces the concrete helping to keep it from cracking all the way through. We know that concrete will eventually crack so we use steel to help it retain it's intended shape and function. If the steel corrodes to a point of weakness the concrete structure is also weakened.
If there is a bridge to an island is it still considered an island?
not really because if it has a bridge going to it then it is conected to the place the bridge starts at. I there was a bridge going to liberty island then it would not be liberty island it would be where that statue is!
What train can you take from Utica Avenue in Brooklyn to 146 Broadway in Manhattan?
Either the A or C (of the A-C-E, the blue line) or the 4 train (of the 4-5-6, the dark green line) or the 3 train (of the 1-2-3, the red line).
If you take the A or C train: you will get on at Utica Avenue in Brooklyn, and you will get off at the Broadway-Nassau Street Station. You will exit the subway on Fulton Street, between Broadway and Nassau Street.
Walk half a block west to Broadway, and turn left. Walk 3 blocks south on Broadway to Liberty Street. 146 Broadway is near the corner of Broadway and Liberty Street.
If you take the 3 train: you will get on at Utica Avenue, and you will get off at the Fulton Street Station of the 2 and 3 trains. You will exit the subway on Fulton Street, near the corner of William Street.
Cross William Street and walk 2 blocks west on Fulton Street, until you get to Broadway. Turn left on Broadway and walk 3 blocks south to Liberty Street.
If you take the 4 train: you will get on at Utica Avenue, and you will get off at the Fulton Street Station of the 4 and 5 trains. You will exit the subway at the corner of Fulton and Broadway.
Walk 3 blocks south on Broadway until you get to Liberty Street.
See the Related Link below for a complete New York City subway map.
Which bridge connects Upper Manhattan to New Jersey?
There are three bridges connecting Manhattan to Brooklyn: the Brooklyn Bridge, Manhattan Bridge and Williamsburg Bridge. You can remember them, and the order they are in from south to north, very easily, as the acronym formed by their names is the name of a popular kind of car, the BMW: Brooklyn, Manhattan, Williamsburg.
What is the safest bridge in the world?
That depends on your idea of 'safest'... For deaths, there are many where nobody has died. As far as injuries go, it is unknown. However, I built a bridge in the woods and nobody has died or been injured on it. I call it the Way-To-Uncle-Tommy's-House-That-Mom-And-Dad-Said-Not-To-Go-To-Because-He-Was-A-Pedophile-But-He-Gave-Me-Cigarettes-And-It-Didn't-Hurt-That-Much-Anyway-Bridge.
What is a beam bridge made out of?
Most highway beam bridges are made of concrete and steel. Beam Bridges are in the form of plate grinders, box grinders or trusses.
What is the best type of bridge?
truss bridges are able to support the most weight applies to the bridge, especially when the weight is applied to the middle