0
Chevy Camaro Z28
This category covers questions about the Z/28 custom option for the first generation (1966-1969) Chevrolet Camaro. The Z/28 option featured a 302 cubic inch small-block V-8 engine, a 3 inch crankshaft with 4 inch bore, an aluminum intake manifold, and a 4-barrel vacuum secondary Holley carburetor. The Z/28 also came with upgraded suspension, racing stripes, and "Z/28" emblems.
3,093 Questions
How do you change the fuel pump in a 1983 camaro Z-28 wcrossfire inj?
Just had mine done on my '83 Z28, and highly recommend you take it to somebody professionally and let them do it. Being that the pump is in the gas tank, that is bad enough. However, the garage that did mine stated he needed to move the stock exhaust muffler system. Being that it was rusty, he needed to cut it and re-weld. Not to mention, he also needed to swing the rear axle out of the way, in order to lower the gas tank. So, unless you have lots of time and patience, I highly recommend you forgo the hassle.
What is involved in changing a fuel pump on a 1990 IROC 5.7 TPI?
Take the gas tank down and change it out.
What oil do I put in a 1987 Chevy camaro z28 rear end?
The 87 comaro if stock takes GL90 gear oil , if its a posi you will need a special additive
Good luck
How do you fix a 1989 camaro trunk motor?
The normal problems with the pull down motor is the plastic gear or housing on the bottom. The rebuild is simply swapping the parts and takes only a few minutes.
eBay usually has several rebuild kits available with the proper gear and housing or replacement pull down motors.
If it doesn't say on the title, take the VIN number to a GM dealer and they should be able to look it up. If it's not it wouldn't be the first fraud I've seen. I once met someone that swore they had a v6 Z-28 and couldn't find parts for it. They were NOT happy when I explained that what they really had was a plain v6 camaro with the Z-28 ground effects and spoiler bolted on.
97 z28 won't start just makes a zipping sound?
sounds to me like it the starter drive not engaging completely have your starter checked i think you might need a new one
Why would there be no flow from new water pump to heater core in your 1983 camaro?
Hose blockage, core blockage, disconnected heat valve.
Where in the engine of a camaro 1986 is the EGR valve located?
if you are looking at the car it is going to be on the left side fairly far back it is to the right of the valve cover on the left side tho and it is a oval like object (all this is what i know from mine mine is carborated tho so i have no idea if this is accurate)
How many 1989 iroc-z camaros were made?
The 1989 Chevrolet Camaro IROC-Z (RPO Code 1FP87) was built in a coupe and convertible options. The available powertrains for the IROC-Z were the LO3, LB9, and L98 8-cylinder engines with 5-speed manual or 4-speed automatic transmissions. 20,067 IROC-Z coupes and 3.245 convertibles were built that year.
Does any one know how to repair a 1979 Chevrolet Camaro Z28 steering column horn set up?
It will be best for you to buy a Haynes Manual at a parts house or bookstore. It will give you full details and pictures. They have them that are specific to your car so you are not buying information on something you do not need.
Is a rear end the same on a 1999 and a 2001 Camero Z28?
yes the rear end is the same from 82-2002 the breaks and gear ratio's are what makes the difference
What is the top speed for 1986 Camaro z28 Camaro?
Hi, visit www.thirdgen.org/cd_oct_1984_iroc_camaro_z28. Details of speed etc for 84 camaro. should not differ much.
My 84 z28 with a 305HO topped at 136, and my 91 rs with a tbi 305 topped at 131. Both had a 5spd.
Which AC port is the low side on a 1988 IROC-Z camaro?
The port with the black cap on it is the low side as the red cap is the high side.
What color coolant do you need for a 1994 Z28 Camaro?
I'm sorry , but this really is a joke right ? Well if it's not. The color makes no difference. Don't put straight antifreeze in it. It's sold premixed 50/50 or you can mix it yourself. In the winter you want it to be about 70/30 ( more antifreeze than water ) or if it's already got 50/50 in it, top it off with straight antifreeze. May have to drain some out to do this. They make testers to check it, there at the parts store and most gas stations.
