answersLogoWhite

0

📱

Computers

This category includes questions and answers about computers and everything related to computers.

48,002 Questions

What happen to your computer when the hard disk is full?

Typically when your computer is getting close to its storage device being full, you will be warned by your operating system about this. Your system will start to slow down as there will be no space for the OS to store or retrieve its temporary data. If your disk space becomes low enough, your system will grind to almost a halt and you will be forced to clear up space.

What is a RAID controller and what bennefits would you receive?

RAID stands for "Redundant Array of Inexpensive/Independent Disks". RAID works by combining two or more hard drives. It can increase performance and/or data redundancy and/or capacity. There are many different RAID types, the most common being RAID 0 (stripe), RAID 1 (mirror) and RAID 5 (stripe with parity).

In a RAID 0 (stripe) array, data is split equally between the number of disks in the array. For example, when a 2 MB file is written to a RAID 0 array with two hard drives, the file is split in to two parts and 1 MB of data is written to each hard drive. This increases capacity and performance, but sharply decreases redundancy since only one of the drives needs to fail for all information to be lost.

Performance = Drive Speed * Number of Drives

Capacity = Drive Size * Number of Drives

Redundancy allows for no drives to fail.

In a RAID 1 (mirror) array, a complete copy is written to each hard drive in the array. Capacity and performance stay the same, but redundancy is increased. As long as one drive works, you will not lose data.

Performance = Drive Speed

Capacity = Drive Size

Redundancy allows for all but one drive to fail.

In a RAID 5 (stripe with parity) array, you need at least three hard drives. Files are split up to all but one of the drives (similar to RAID 0) and a parity bit is written to the last drive. This increases performance, capacity and redundancy. Performance is not as good as RAID 0, but still better than RAID 1. Redundancy is not as good as RAID 1, but is still quite reliable.

Performance = Drive Speed * (Number of Drives - 1) (Theoretical)

Capacity = Drive Size * (Number of Drives - 1)

Redundancy allows for one drive to fail.

There are other RAID levels, but they are not as common.

The main benefit of using a RAID array is data redundancy and/or performance.

Non-commercial (home) users and enthusiasts wanting a very large increase in performance (theoretically multiples of the number of drives used) usually go for RAID 0 since they often are not too worried about drive failure and they enjoy the larger drive capacities that it provides.

Small businesses who only need cheap redundancy usually go for RAID 1. If one drive fails, the drive can be replaced and the mirror array restored.

Larger businesses or those needing file/database performance go for RAID 5. They can afford the price of an extra drive and a more expensive RAID controller. RAID 5 provides high performance with large capacities while still maintaining data redundancy and is the most desirable in a business or enterprise environment.

There are some other options for RAID such as RAID 10 or RAID 01.

RAID 10 features two separate RAID 0 arrays which are then mirrored in a RAID 1 array.

RAID 01 is the opposite, with two separate RAID 1 arrays which are then striped with a RAID 0 array.

There are other non-standard RAID levels, but most are rather uncommon.

Alternatively, there is also drive spanning (aka JBOD), but this provides no extra redundancy or performance. Drives are "glued", if you will, end to end.

The benefits of each RAID level vary. The type of RAID used depend on the job it must fulfill.

The application of USB?

USB stands for "Universal Serial Bus". It was designed to be a common, easy way to connect a very wide variety of devices to a computer. USB has replaced the PS/2 keyboard and mouse ports, printer ports, DB9 serial ports, external SCSI, and many, many other device buses. USB can be used for just about anything.

If you are talking about a software application required for USB, there is none. Device drivers are required for USB operation, but those are usually generic and can be found on your manufacturer's webpage.

If this does not answer your question, please clarify in the discussion page.

What do you do when the computer's CD drive does not read a PS1 disc?

You can't put a PS1 disc in your PC, it depends if your computer allows video game systems

Is 3 MB of RAM enough to run a computer?

I suppose that would depend greatly on what you plan to do with the computer. However, that is nowhere near enough to run a modern operating system and programs.

What is the difference between a Game Developer and a Game Programmer?

A game developer creates the game's story and plot. A game programmer writes the computer coding for the game. Basically, they take what the developer has and translates it into computer language.

What is AOL's outgoing mail server?

server to send emails,if you are looking for settings to configure with an email client

Set Up Outgoing (SMTP) AOL Email in Any Email ProgramTo set up your email program to send mail through AOL:
  • Set the outgoing (SMTP) mail server to smtp.aol.com.
  • Make sure SMTP authentication is enabled for this server.
  • Enter your screenname as the user name and
  • your AOL screennname's password as the password.
  • Make sure the SMTP server port is set to 587.

How do you sensor reads the amount of money?

It's called bill validator.

Here's an article on them. http://en.wikipedia.org/wiki/Currency_detector

How do you get portal the first slice game on computer?

You can download the demo from Steam if you search it in Steam.

What is an emulator in simple terms for a non-computer genius?

It's a program for playing games from consoles on your computer. Ex: VBA=GBA Emulator.

An added device to a computer such as printer modem etc?

An device that is added to a computer is called a Peripheral. Which categorizes into input and ouput devices.

Input being data put into the computer (keyboard and mouse would be a input devices).

Output being information that is projected or created and then taken out from the computer (printer would be an output device, as would a computer monitor.)

What is invalid data?

Invalid data is information that is false, incomplete, or unrelated to the subject being studied or evaluated. For example, a researcher can falsify data, such as by claiming more people participated in the study than the number who actually responded. A company can make a claim that twists the numbers of satisfied customers. A physician can falsely claim that he has a 100% success rate when half of his cancer patients have died. A drug study could claim that "3 out of 4" patients found this drug helpful, but what if there were only 4 patients who took the drug--ever.

People act on "invalid data" all the time, too, in everyday lives. For example, a boyfriend decides his girlfriend is cheating because she didn't answer her phone. But she lost her phone so that is why she isn't answering. (invalid data/information)

How often do you gain or exchange information via your computer?

I believe that we gain and exchange information every day even when we do not realize that we are.

Why won't my computer close after being on certain webpages?

Probalbly a simle virus, spamware, or spyware. Run an antivirus scanner and get rid of them. Try using the keys "ALT+F4" to forse close a window.

The socket on the outside of the computer that connects the computer to the network Inside the computer this socket is on what?

The socket is on the Network (Interface) Card (Aka NIC) in your computer. The network card is plugged into the PCI (Peripheral Component Interconnect) slot on your motherboard.

What is Malicious Misuse?

It means that whatever action you took was done with the clear intent to cause harm, damage, injury, or death.