How do you ponify your computer?
Step 1: Get a My Little Pony Poster. Step 2: Tape to moniter. Step 3: Enjoy your new ponified computer!
What are the advavantages avd disadvantages of computer in transportation?
the disadvantages of computer in transportation is wala
What does plugged in not charging mean for your computer?
this is actually really simple to fix. all you have to do is:
1. plug in your charger
2. take out your battery from your computer for about 20 seconds.
3. put your battery back in.
What is the function of the sleep key on the computer?
The sleep key shuts down some of the computer's systems in order to conserve energy, but it does not shut the computer completely off and thus you do not have to go through a full boot up of all systems when you want to wake the computer up.
How do you change your user name on a computer if you already started out with one?
In the Control Panel, go to the User Accounts section and then click "Change your account name"
If you know how to use paths, then the following path taken from Windows 7 will take you to the screen with the "Change your account name" link
"Control Panel\All Control Panel Items\User Accounts"
Can you take a picture of someone and say bad things about them on the computer?
Yes, it is possible that you 'can' do it, though I suggest not doing it.
Which of these suites include a variety of programs designed to make computing safer?
Norton Internet Security Suite
Why is CPU important to the computer?
The Computer Processing Unit (CPU) is the brains of the system, provided an operating system has been installed first. Remove the CPU and you are left with a load of non-functional electronics.
How do you reset a kenworth computer?
Which computer, and what exactly are you trying to reset? If you want to reboot the entire thing, disconnect the batteries, let it sit for five minutes, then reconnect the batteries. If you're trying to change settings, you'll need a computer with the appropriate software for it.
please help to response a question
What are the five stages in DLX pipeline in computer architecturect?
DLX is a simple pipeline architecture for CPU. It is mostly used in universities as a model to study pipelining technique.
The architecture of DLX was chosen based on observations about most frequently used primitives in programs. DLX provides a good architectural model for study, not only because of the recent popularity of this type of machine, but also because it is easy to understand.
Like most recent load/store machines, DLX emphasizes A simple load/store instruction set
Design for pipelining efficiency
An easily decoded instruction set
Efficiency as a compiler target
Operations There are four classes of instructions: Load/Store
Any of the GPRs or FPRs may be loaded and stored except that loading R0 has no effect.
ALU Operations
All ALU instructions are register-register instructions.
The operations are :
- add
- subtract
- AND
- OR
- XOR
- shifts
Compare instructions compare two registers (=,!=,<,>,=<,=>).
If the condition is true, these instructions place a 1 in the destination register, otherwise they place a 0.
Branches/Jumps
All branches are conditional.The branch condition is specified by the instruction, which may test the register source for zero or nonzero.
Floating-Point Operations
- add
- subtract
- multiply
- divide
An Implementation of DLXImplementing the instruction set requires the introduction of several temporary registers that are not part of the architecture.
Every DLX instruction can be implemented in at most five clock cycles. The five clock cycles are Instruction fetch cycle (IF)
Instruction decode/register fetch (ID)
Execution/Effective address cycle (EX)
Memory access/branch completion cycle (MEM)
Write-back cycle (WB)
Detailed description of each follows:
Instruction fetch cycle (IF):IR <- MEM[PC]
NPC <- PC +4
Operation:
- Send out the PC and fetch the instruction from memory into the instruction register (IR)
- increment the PC by 4 to address the next sequential instruction
- the IR is used to hold the instruction that will be needed on subsequent clock cycles
- the NPC is used to hold the next sequential PC (program counter)
Instruction decode/register fetch (ID):A <- Regs[IR6..10]
B <- Regs[IR11..15]
Imm <- ((IR16)16##IR16..31)
Operation:
- Decode the instruction and access the register file to read the registers.
- the output of the general-purpose registers are read into two temporary registers (A and B) for use in later clock cycles.
- the lower 16 bits of the IR are also sign-extended and stored into the temporary register IMM, for use in the next cycle.
- decoding is done in parallel with reading registers, which is possible because these fields are at a fixed location in the DLX instruction format. This technique is known as fixed-field decoding.
Execution/Effective address cycle (EX):
The ALU operates on the operand prepared in the prior cycle, performing one of four functions depending on the DLX instruction typeMemory reference: ALUOutput <- A +ImmOperation: The ALU adds the operands to form the effective address and places the result into the register ALUOutput
Register-Register ALU instruction: ALUOutput <- A opBOperation: The ALU performs the operation specified by the opcode on the value in register A and on the value in register B. The result is placed in the register ALUOutput.
Register- Immediate ALU instruction: ALUOutput <- A opImmOperation: The ALU performs the operation specified by the opcode on the value in register A and on the value in register Imm. The result is placed in the register ALUOutput.
ALUOutput <- NPC + Imm
Cond <- ( A op 0 )
Operation:
-The ALU adds the NPC to the sign-extended immediate value in Imm to compute the address of the branch target.
-Register A, which has been read in the prior cycle, is checked to determine whether the branch is taken.
- the comparison operation op is the relational operator determined by the branch opcode (e.g. op is "==" for the instruction BEQZ) Memory access/branch completion cycle (MEM):
The only DLX instructions active in this cycle are loads, stores, and branches. Memory reference: LMD <- Mem[ALUOutput] or Mem[ALUOutput] <- BOperation:
-Access memory if needed
- If the instruction is load , data returns from memory and is placed in the LMD (load memory data) register
- If the instruction is store, data from the B register is written into memory.
- In either case the address used is the one computed during the prior cycle and stored in the register ALUOutput
Branch: if (cond) PC <- ALUOutput
else PC <- NPCOperation:
- If the instruction branches, the PC is replaced with branch destination address in the register ALUOutput
- Otherwise, PC is replaced with the incremented PC in the register NPC
Write-back cycle (WB):Register-Register ALU instruction: Regs[IR16..20] <- ALUOutput Register-Immediate ALU instruction: Regs[IR11..15] <- ALUOutput Load instruction: Regs[IR11..15] <- LMDOperation:
- Write the result into the register file, whether it comes from the memory(LMD) or from ALU (ALUOutput)
- the register destination field is in one of two positions depending on the opcode
Pivot table
What are the disadvantages of doordarshan?
it is having a lot of educational things but less cartoons
What are the disadvantages of street vendors?
the disadvantages of street vendors ps hat they do not make fixed profits and they cannot budget for the money tha they get. they depend on people to live
What is the meaning of throttling in computer?
Throttling is process to keep your CPU healthy and increase life of your computer(with respect to running process's,temperature & speed)it is used to decrease the speed of the system temporarily when the system is idle for long duration and also helps in Laptops to increase life span of battery. Some time it also helpful in "Hardware Exceptions" we can decrease the performance of CPU by using throttling process.