Fireplaces

Can get up to 150-300 degrees Farhen hight

The burning of wood in a fireplace generates heat and light in the form of flames called combustion. During combustion, the wood reacts with oxygen to release energy in the form of heat and light.

Your question is sort of like how fast a car can go- depends on the car. There are different fireplaces- vented, ventless, heat exchanger, etc etc. We had a ventless fireplace with a heat exchanger- and it produced a good deal of heat. Others may be less. You should talk with a gas appliance dealer of your local gas utility for more information.

To clean out a chimney, you should first protect the surrounding area with a tarp or drop cloth. Next, use a chimney brush and rods to manually clean the soot and debris from the chimney walls. Alternatively, you can hire a professional chimney sweep to clean the chimney thoroughly and safely.

An electric heater works by passing an electric current through a high resistance wire, causing it to heat up and produce heat through a process called Joule heating. The heat is then transferred to the surrounding air through convection, warming up the space.

It may be a good Idea to have your fireplace serviced by a qualified professional to insure you have no harmful emissions from it.

A few things that can cause a fireplace to emit odors are:

New fireplaces have what is referred to as a burn in period, normally 8 to 12 hours, during which it may emit some rather strong odors. This is a result of oils and paints used in production baking off or curring and should subside after the recommended burn in period has been met. It is not necessary to run it continuously to reach the recommended period.

It is normal for a fireplace that has not been used for some time ( summer ) to emit a musty odor when it is first put in service. this is caused by dust in the venting and on the appliance burning off. Contributing factors like pet dander and cleaning products can add to the odor and make it quite strong. Normally these type of odors will subside after a couple hours of operation.

Vent free fireplaces ( no matter what the manufacture says ) always have an odor.

Make sure you have a carbon monoxide detector in your home and follow local building codes or manufacturer's specifications for installing it.

Fire goes out when one or more elements of the fire triangle (heat, fuel, oxygen) are removed. This can happen through extinguishing methods like smothering the fire to remove oxygen, cooling the flames to reduce heat, or removing the fuel source to starve the fire.

Fires go out when one or more elements of the fire triangle are removed. This could be done by removing the fuel source, cutting off the oxygen supply, or eliminating the heat source. In some cases, fires may also be put out using firefighting equipment such as water, foam, or fire extinguishers.

A fireplace insert is a self-contained unit that is installed into an existing fireplace to enhance efficiency. It works by creating a closed combustion system that traps and circulates warm air around the insert, radiating heat into the room. This helps increase the heating efficiency of the fireplace and reduces heat loss up the chimney.

The tensile strength of pressure treated wood can vary depending on the type of wood and the treatment process used. On average, pressure treated wood can have a tensile strength ranging from 2,000 to 4,000 pounds per square inch (psi).

Yes, you can replace gas logs with lava rocks in your fireplace. Lava rocks can provide a more natural look and feel compared to gas logs. However, make sure to check with a professional to ensure that your fireplace is suitable for burning with lava rocks and to ensure proper ventilation.

Smoke rises because it is hotter and less dense than the air around it. The chimney is designed to create a draft that pulls the smoke up and out of the fireplace, preventing it from flowing back into the room. This draft is created by the temperature difference between the inside and outside of the chimney.

Yes, farts are flammable because they contain methane and hydrogen gases, which can ignite in the presence of a flame. However, caution should be used when attempting to test this as it can be dangerous.

Wood burns or combusts due to a chemical reaction called combustion, which occurs when oxygen molecules in the air react with the wood. The heat from an external heat source or initial flame breaks down the wood's chemical structure, releasing volatile gases. These gases then combine with oxygen in the air, producing heat and light as they release energy.

Chimney build up is typically referred to as creosote. This is a tar-like substance that can accumulate inside the chimney when wood or fossil fuels are burned, which can pose a fire hazard if not regularly cleaned.

While the TYPE of wood does eneter into this, the CONDITION of the wood is more important. almost any wood that is properly seasoned will burn well- they do give off different amounts of heat per lb of wood. If it has been cut, split, and stacked out of the weather for one full year, you will have good results with most woods. I prefer hardwoods such as hickory, locust, ash and oak for hot clean fires.

Complete combustion produces carbon dioxide. Incomplete combustion produces carbon monoxide.

To remove black residue from a gas fireplace, start by turning off the gas supply and allowing the fireplace to cool completely. Then, use a mixture of warm water and mild detergent to gently clean the affected areas, followed by wiping with a clean, damp cloth. For tougher stains, you may need a specialized fireplace cleaner or consult a professional for assistance.

Fireplace ash is generated as a natural byproduct of burning wood. Especially with a long burning fire with several large logs, you can be left with a large quantity of ash in your fireplace. For cleanliness and safety, it's important to remove the buildup of fireplace ash. You can do something as simple as having an ash bucket next to your fireplace to scoop out the extra ashes periodically. Another option is to have an ash vacuum to clean out all the ashes. I'll share a link to a nice ash bucket and fireplace vacuum below.

Minimal - excellent firewood. Season the wood (cut, stack, let dry) for least creosote. Note, however, that this is for hard (yellow) Birch. White or paper birch has virtually no creosote either, but it burns like Kleenex - low heat value.

Ash wood burns well because it has a low moisture content, which allows it to ignite quickly and produce a high heat output. Additionally, ash wood has a good balance of density and resin content, making it suitable for efficient combustion and long-lasting fires.

Just a guess- but most have a sensor known as a thermocouple. This detects the heat of the flame of the pilot light, and keeps gas from flowing if the pilot light is not lit. check that your pilot light (a very small flame) is burning, and that the flame heats a small metal tube- about as big as a wooden match. If pilot is out, get it lit, and let burn for 5 minutes, and try lighting fireplace. If it still will not stay lit, the thermocouple may need replacement- they DO wear out. Check with your local gas appliance repair service. While they are fixing it, have them show you correct lighting process.

Blue flames can be an indicator of temperature, because blue flames burn hotter than yellow flames, or it could be a chemical that burns blue. Something else that could create blue flames in a gas fireplace is if the air-to-gas mixture ratio is off, more air means bluer flames.

No, rocks should not be used in a gas fireplace as they can become overheated and potentially crack or explode, posing a safety hazard. It is recommended to only use materials specifically designed for gas fireplaces to ensure safe operation.

Your problem is likely due to something with the thermocouple. That is the device that senses heat fom the pilot light- no heat, it turns off gas as a safety measure. Get a gas appliance repairman to check- they do go bad, get bent, etc. Not incredibly expensive to replace.