Assuming that you mean instantaneous (not "stantenous") it refers to speeds measured over an increasingly small time interval. In fact, it may be calculated as the derivative of the distance of the object with regard to time.
Yes, some times gravity effects but inertia depends upon external force and mass of it. Gravity is also an external force but in mass, higher the mass, higher the inertia and lower the mass, lower the inertia. For suppose an elephant and human, both are running in the same speed, human takes a short time to turn himself for his mass is less and less force is applied to turn whereas in elephant, its hard for it has more mass and takes a greater force to turn. Written by: Rohan Vaidya
Basic: Mach is a measurement of the speed of sound in air. Therefore, mach6 is six times the speed of sound in air.
761.2 * 6 = 4,567.2 mile/hour (mph)
More in depth:
"Mach" is a relative measurement of speed and fluid temperature.
Here are some examples of Mach 6:
CAS = Calibrated Air Speed. The speed which a instrument in the plane would show.
TAS = True Air Speed. The actual speed of the object relative to the medium it is traveling in.
The gas will have thermal energy given by its specific heat capacity (at constant pressure or volume depending on the situation) times the rise in temperature. This thermal energy is possessed because of the increased kinetic energy of its molecules, due to the rise in temperature.
The top speed for a Suzuki V-Strom 650, also known as the DL650, is typically around 120-130 mph depending on various factors. Although it has good performance, it's not typically categorized as a high-speed sport bike.
The top speed of a Suzuki LTZ-400 can vary depending on various factors such as rider weight, terrain, and modifications to the ATV. On average, a stock LTZ-400 can reach speeds of around 65-70 mph.
What is the kinetic energy of a person on a treadmill?
There is no single answer. Velocity is relative, and that means that the kinetic energy of a body also is relative. To calculate the kinetic energy you have to choose a reference frame, and the answer will be different depending on if you choose the person, the belt of the treadmill or the moon. Neither answer is more right or wrong than any other.
1.364 seconds to travel 50 feet at 25mph.
120 km is about 74.56 miles
1 mile is about 1.61 km or 0.621 mi = 1 km
120km/h x 1mi/1.609km = 75 mi/h
If you are looking for mph to kph then use the following
Mph X 1.609344 = Kph
Kph / 1.609344 = Mph
If a object travels 90 feet in 1.5 seconds how fast is it goin?
It depends on how long the object is. If the object is a dot, it will take 1.5 sec.
This is not true, the size of the object is not important. If it is a car, a fly, or a plane it is all the same!
If you take 90 mi/hr and multiple it by 5820ft you get ft/hour. This is 523800 ft/hr. Then divide this by 60 to get ft/min which is 8370, then divide it by 60 to get ft/sec., which is 145 ft/sec. Since you are only going 60 ft. divide 60/145 this is .41 sec. So it takes about a 1/2 sec. at 90 miles an hour to go 60ft.
When lightning occurs and creates thunder you see the lightning immediately because light travels so fast (abot 186,000 miles per second). But sound travels much slower so you don't hear the thunder until several seconds after it occurs. I believe the approximate rule that is used is sound travels about 1 mile in 5 seconds. So if it is 15 seconds before you hear the thunder then the storm is about 3 miles away.
Killing anyone is considered morally wrong and illegal, including hippies. It is important to resolve conflicts peacefully and respect each individual's right to life and freedom of expression. If you are experiencing difficulties with hippies or any other group, it is recommended to seek constructive ways to address the issues without resorting to violence.
Describe the change in kinetic energy when the temperature of an object increases?
The more an objects kinetic energy increases the more it's temperature increases. An object that is traveling at 30 miles per hour will have a higher temperature than an object traveling at 10 miles per hour. This is in part due to friction. Mostly however, it is due to the fact that kinetic energy excites atoms in the object raising the objects temperature. You could put it like this: temperature = energy + atoms. Hope this helps.
The initial velocity of the ball can be calculated using the kinematic equation for projectile motion. By using the vertical component of velocity (V0y) and the time of flight, we can determine the initial velocity needed for the ball to reach the hoop. The velocity components are V0x = V0 * cos(θ) and V0y = V0 * sin(θ), where θ is the initial angle. The time of flight in this case is determined by the vertical motion of the ball, and it can be found by using the equation of motion for the vertical direction, considering the initial vertical velocity, the gravitational acceleration, and the vertical displacement of the ball. Once these values are calculated, the initial velocity can be computed by combining the horizontal and vertical components of the motion.
The average acceleration of the sprinter can be calculated using the formula ( a = \frac{v_f - v_i}{t} ), where ( v_f = 11.5 , \text{m/s} ), ( v_i = 0 , \text{m/s} ), and ( t = 15 , \text{m} ). Substituting these values into the formula gives an average acceleration of approximately 0.77 m/s².
Speed can be considered purely as a measure of velocity, which is the rate of change of an object's position with respect to time. In this sense, speed itself is a quantitative and objective measurement. However, the context in which speed is used, such as in sports or transportation, may involve subjective factors that can impact how we perceive speed.
What is the top speed for a stock 2002 XC SP 700?
The top speed of a stock 2002 XC SP 700 is typically around 90-95 mph, depending on factors such as rider weight, track condition, and environmental conditions.
Why trains do not stop immediately after applying brakes?
Trains do not stop immediately after applying brakes due to their large mass and momentum. It takes time for the brakes to slow down the moving train, and the distance needed to stop depends on the train's speed, weight, and the effectiveness of the braking system. Additionally, train brakes are designed to prevent skidding and provide a smooth and controlled stop.
Does an atom's nucleus hold a large amount of kinetic energy?
Yes, the nucleus of an atom holds a large amount of potential energy due to the strong nuclear forces binding the protons and neutrons together. This potential energy can be released as kinetic energy during nuclear reactions.
Why is electricity a form of kinetic energy?
I believe electrical energy is considered potential energy and not kinetic. Kinetic energy is when an object is moving, electrical energy is a stored energy that can be converted to kinetic energy.
How many mph do you have to go to go 870 feet in 2 minutes?
To cover 870 feet in 2 minutes, you would need to travel at an average speed of 7.25 feet per second. Converting this to miles per hour, you would need to travel at approximately 4.95 miles per hour to cover that distance in that time.
What are the kinetic moving sculptures that Alexander Calder invented?
Alexander Calder is known for inventing mobiles, which are kinetic sculptures that move in response to air currents. He also created stabiles, which are stationary sculptures that give the illusion of movement through their abstract shapes and forms. Calder's innovative use of wire and metal transformed sculpture into a dynamic and interactive art form.
Miguel biked 29040 ft in an hour convert this to mph?
29,040 feet in one hour converts to 5.5 miles per hour.