answersLogoWhite

0

🧪

Mining

Mining for coal is something that is widely known, but did you know that diamonds, uranium, copper, and other non-renewable natural resources are also mined? There are two types of mining; surface and subsurface. Questions about the methods and types of mining, what ores are mined, and related questions should be asked in this category.

4,677 Questions

What mineral is mined in barrow island?

The main mineral mined on Barrow Island is gypsum. Gypsum is a soft sulfate mineral used in a variety of industries, including construction and agriculture.

When did coal mining begin?

More than 2000 years ago. Theophatrus wrote of simple coal mining more than 270 years before Christ. Cave men may have harvested coal lying at or near the surface.

Who invented mining?

Mining has been practiced for thousands of years by various ancient civilizations. There isn't a single inventor of mining, but rather it has evolved over time as humans discovered and developed techniques to extract valuable minerals and ores from the earth. The history of mining dates back to prehistoric times and has been crucial for the development of civilizations.

What are metal bearing rocks sought after in mining called?

Metal-bearing rocks sought after in mining are typically called ore deposits. These deposits contain high enough concentrations of valuable metals such as copper, gold, silver, or iron to be economically viable for extraction. Mining companies prospect for ore deposits to extract and process the valuable metals.

What does quarries mean?

  1. (n.)an excavation or pit, usu. open to the air, from which building stone, slate, or the like, is obtained by cutting, blasting, etc.

    Category: Building Trades, Mining

  2. an abundant source or supply.

  3. (v.t.)to obtain from or as if from a quarry.

    Category: Building Trades, Mining

  4. to make a quarry in.

    Category: Mining

What are the minerals and metals mined in the Arctic Lowlands?

Minerals and metals mined in the Arctic Lowlands include gold, silver, lead, zinc, and copper. These resources are extracted through mining operations in areas like Alaska, Canada, and Russia, with companies focusing on responsible and sustainable practices to minimize environmental impact in this delicate ecosystem.

3 things mined in Arizona?

name four agcutural animals and plants in the state arizona

When was halite discovered?

Halite, or rock salt, has been known and used by humans for centuries. It was likely discovered in prehistoric times when humans began to use salt for preserving food and enhancing flavor. Archaeological evidence shows that salt mining dates back to around 6000 BC.

Why were the mining towns in the Kootenays abandoned?

Mining towns would spring up, almost overnight, whenever prospectors discovered ore in sufficient quantity to make mining profitable. Whenever the ore was exhausted, or whenever it was no longer profitable to mine it, the mines would close, miners would be thrown out of work, and people would move elsewhere in search of other jobs.

What did the trappers putters and hewers do in coal mines?

Trappers were responsible for opening and closing ventilation doors to direct airflow, while putters moved coal carts to the surface using ponies or mechanical haulage. Hewers were miners who manually extracted coal from the seam using picks and shovels.

Has mining of copper changed over time?

Yes, mining of copper has evolved over time with advancements in technology and mining techniques. Modern mining methods are more sophisticated and efficient, leading to increased productivity and reduced environmental impact compared to historical mining practices. Additionally, there is now a greater emphasis on sustainability and responsible mining practices in the copper mining industry.

What do mines look like?

There are several different types of mines. Some are cut on the surface and are dug hundreds of feet downward. Other mines are shafts and drifts that sometime go for many miles through solid rock.

When did coal mining start?

Coal mining began in Pre-History of the Human Race. Some of the oldest cave paintings in the world are drawn by coal. Hunter Gatherers would often identify coal at the land surface level, following by digging deeper if necessary. Populations rapidly found use for coal. Portable Fire, creation of tools, hunting instruments, and food preparation tools among thousands of other uses evolving uses as the Human Race evolved. It is common for Indigenous Americans to use coal as Animal and Human Body / War Paint. Ancient Egyptian Calligraphy scribed some 2,000 years BC has provided written records of large scale coal mining. Coal ash was used to settle the stones of the Great Pyramids, for example.

What did miners wear?

Miners historically wore protective gear such as helmets with lamps, overalls, boots, and safety belts. These outfits were designed to ensure their safety in the hazardous underground mining environment. Today, miners also use modern equipment such as respirators and high-visibility clothing for added protection.

Where was iron discovered?

Iron was discovered and used by ancient civilizations in the Middle East around 3000 BC. It was likely discovered as a byproduct of copper smelting, and its wide availability and usefulness allowed it to revolutionize technology and society.

When and where was iron discovered and by whom?

The middle east, Ancient India and Ancient Greece in about the 12th century BC. It was the 8th BC in central Europe and 6 th BC in Northern Europe. Since it was so long ago no one can say who actually found the first iron ore. new study led by Children's Hospital Oakland Research Institute senior scientist, Elizabeth Theil, Ph.D., is the first to suggest that a small protein or heptapeptide (seven amino acids wrapped into one unit) could be used to accelerate the removal of iron from ferritin. The results of this study may help scientists develop new medications that dramatically improve the removal of excess iron in patients diagnosed with blood diseases such as B-Thalassemia (Cooley's anemia) or Sickle Cell Disease.

The study appears in this month's issue of the Journal of Biological Chemistry and was conducted by Dr. Theil and her co-authors Xiaofeng S. Liu, postdoctoral fellow at Children's Hospital Oakland Research Institute, Marvin J. Miller, Ph.D. and Leslie D. Patterson, a predoctoral student, both from the University of Notre Dame. The scientists knew that the ferritin protein cage had pores that could open and close. It was also known that chelators (a method to detoxify blood) removed iron faster when the pores were open.

"We wanted to prove a hypothesis that a small protein or peptide could bind to ferritin and could be used to regulate ferritin pores," said Dr. Theil. "Our hypothesis was correct. We proved that when a binding peptide of seven amino acids, a heptapeptide, is coupled with Desferal the rate of removal of iron from ferritin is eight times faster." Desferal is currently used to detoxify the blood of patients with iron overload and is a common therapeutic remedy.

Ferritin is a protein that concentrates iron in its inner core or 'cage'. It plays a critical role in understanding iron overload, which can lead to a variety of symptoms including chronic fatigue, weakness, joint pain and arthritis. If left untreated, iron overload can lead to serious problems, including diabetes, liver and heart disease.

----------------------------

Article adapted by Medical News Today from original press release.

----------------------------

The study's results are based on laboratory tests. The National Institutes of Health (NIH), the Cooley's Anemia Foundation and Children's Hospital & Research Center Oakland provided funding for this research.

Click here for more information on Dr. Theil's research.

Research at Children's Hospital & Research Center Oakland, CA

Research efforts at Children's Hospital & Research Center Oakland are coordinated through Children's Hospital Oakland Research Institute (CHORI). Children's Hospital Oakland is Northern California's only freestanding and independent children's hospital. CHORI's internationally renowned biomedical research facility brings together seven centers of excellence that are devoted to clinical and basic science research to treat and prevent disease. CHORI has approximately 300 staff members and an annual budget of more than $49 million. The National Institutes of Health is CHORI's primary funding source. The institute is a leader in translational research, bringing bench discoveries to bedside applications. These include providing cures for blood diseases, developing new vaccines for infectious diseases and discovering new treatment protocols for previously fatal or debilitating conditions such as cancers, sickle cell disease and thalassemia, diabetes, asthma, HIV/AIDS, pediatric obesity, nutritional deficiencies, birth defects, hemophilia and cystic fibrosis.

Explian about contact between granite and sandstone?

This is a nonconformity. the contact is between an igneous and sedimentary rock formation. Granite should be on the bottom and sandstone on top, If this is not the case then some type of over-turning has taken place. The depositional envornment allowed sand to acculate over the top of the granite and later consolodated into a rock. This is called a contact. Many years ( perhaps millions) passed) before the whole mass became a rock formation. Can you identify other contacts in the area? If so, you may be able to date this contact and correlate it to other areas in your vicinity. See if you can trace it and look on geologic maps to see if it is mapped. If not, you may have found something that no one has yet discovered.

What equipment was used for mining in the past?

In the past, mining equipment included tools such as pickaxes, shovels, and hand drills for digging and breaking up rocks. As technology advanced, manual tools were supplemented or replaced with machinery like steam engines, drills powered by compressed air, and conveyor belts for transporting materials.

What was the date the first diamonds were mined?

It's possible that diamonds were discovered in India as long ago as 6,000 years.

Without documentation, it might be difficult to settle on a precise year in which diamonds were first mined.

Initially, it's understandable that diamonds were found far from their point of origin, having been washed into riverbeds by water running over the diamond pipe.

What does the mining term piker mean?

A piker in mining means someone who take only small, cautious steps. It can mean anyone who is stingy or a cheapskate or very cautious in gambling. Thought to have been derived from "poor migrants who walked the pike".

What does the term data mining refer to?

Data mining is a new interdiceplenary field that involves large data sets and applying statistics, artificial intelligence, and applying them to help with database management. It is believed that it gives businesses an information advantage on business intelligence.

"Data mining" is a type of computer science, in which one mines data and analyzing it in order to determine patterns and structure for future use. Applications of these structures then can be used in designing databases, artificial intelligence, and statistical analysis.

What is data reduction in terms of data mining?

Data reduction in data mining refers to the process of reducing the volume of data under consideration. This can involve techniques such as feature selection, dimensionality reduction, or sampling to simplify the dataset and make it more manageable for analysis. By reducing the data, analysts can focus on the most relevant information and improve the efficiency of their data mining process.

How Data Mining is useful in MIS?

Data mining in Management Information Systems (MIS) helps organizations to identify trends and patterns within their data that can be used to make better strategic decisions. By analyzing large datasets, data mining can uncover insights that may not be immediately apparent, helping businesses to optimize their operations, improve forecasting accuracy, and enhance decision-making processes.