Does an Aneroid baraometer need to be up right to work properly?
Yes, an aneroid barometer should be kept upright to work properly. Tilting or laying it flat can affect the accuracy of the readings as it relies on the movement of a small, flexible metal box called an aneroid cell to measure air pressure.
Magnesol is actually a food-grade absorbent powder used mainly in commercial kitchens to filter and clean frying oil. It is not designed to put out fires. For extinguishing fires, it is recommended to use appropriate fire extinguishers based on the type of fire.
When 2 balloon have opposite charges are placed together?
The balloons will be attracted to each other due to the difference in charge. This is because opposite charges attract each other according to the principle of electrostatics.
Does wind travel faster uphill or downhill?
Wind will generally travel faster uphill, as it gets compressed due to the terrain funneling it through a narrower space. Downhill, the wind may slow down as it spreads out and encounters less resistance.
How deep is earths mantle in kilometers?
Earth's mantle is a rocky shell about 2,890 km (1,800 mi) thick that constitutes about 84 percent of Earth's volume. Two main zones are distinguished in the upper mantle: the inner asthenosphere composed of flowing rock in the state of plasticity, about 200 km thick, and the lowermost part of the lithosphere, composed of rigid rock, about 50 to 120 km thick. A thin crust, the upper part of the lithosphere, surrounds the mantle and is about 5 to 75 km thick. The mantle is divided into sections which are based upon results from seismology. These layers (and their depths) are the following: the upper mantle (starting at the Moho, or base of the crust around 7 to 35 km, downward to 410 km), the transition zone (410-660 km), the lower mantle (660-2891 km), and in the bottom of the latter region there is the anomalous D" layer with a variable thickness (on average ~200 km thick)
Steel is primarily composed of iron, which has a high melting point. In order to burn, a material needs to combine with oxygen in a chemical reaction, but the high melting point of steel prevents it from reaching the necessary temperature for burning. Additionally, steel does not contain volatile components that can vaporize and ignite like other flammable materials.
A standard test tube is typically around 10-20 centimeters (4-8 inches) long.
Why dont action and reaction force cancel out?
im am not sure if this is correct or not but my guess is its a matter of mass for example is a ball with a mass of 5 is hit by an object with the mass of 10 it will not completely cancel out the force of the ball with 10 mass it will decrease the speed please make your question a bit more specific if this doesnt answer it
Different Person_The action-reaction forces can not act on the same object.
In electrical circuits, reactance is roughly the equivalent in AC circuits to what resistance is in DC circuits.
But the reactance of a capacitor or an of an inductor varies with the applied frequency.
Impedance is the expressed measure, and it will be quoted in Ohms.
Does acceleration happen when your stopping?
When you change your straight-line velocity (speed) from slow to fast you have positive acceleration and from fast to slow it will be negative acceleration.
Acceleration = velocity change divided by time taken.
So when you are traveling at say 10 m/s and decelerate to zero in 5 seconds, your (negative) acceleration will be = (0-10)/5 = - 2 metres per sec per sec.
Normally expressed as -2m/s^2.
What is the reaction of hydrochloricacid with cement?
When hydrochloric acid reacts with cement, it can dissolve the calcium silicate compounds in the cement, leading to the formation of calcium chloride and silicic acid. This can weaken the structure and integrity of the cement, causing it to deteriorate over time.
Onyx is the usual one, but others are Obsidian, Spinel, Drusy and even some Agates contain black pigments
What is tear strength of fabric?
Tear strength of fabric refers to the amount of force required to tear a fabric apart. It is a measure of the fabric's resistance to tearing or breaking when subjected to stress or tension. Tear strength is an important factor in determining the durability and quality of a fabric.
What is the slider thing on door closers that keeps the door open called?
Depends on where you're located. In some states I've heard the parts referred to as the hydralic armature and fob, down south it was the steel shank and grip.
What is the cost of nitrogen gas?
The cost of nitrogen gas can vary depending on the supplier, volume purchased, and location. On average, industrial-grade nitrogen gas typically ranges from $0.30 to $2 per cubic meter. Specialty grades or higher purity nitrogen can be more expensive.
A pH value of exactly 5 is possible, but it is uncommon due to natural buffering systems that resist small changes in pH. In most cases, external factors or substances can easily shift the pH slightly above or below 5, making it rare to find exactly pH 5 in a natural system.
What happens to the bullets that are fired upwards to the sky. Have anyone died because of it?
Someone dieing from a bullet being shot into the air is uncommon but is has happened before. What happens it it fly up for a few miles and since it's usually not straight up it doesn't land where you shoot it from. Once the bullet is close to the ground after being shot up it is usually going faster than is was when it was first shot.
Examples of items that weigh around 4.6 pounds include a gallon of milk, a standard laptop, or a small bag of flour.
How is Pollen is an important adaptation to the terrestrial environment?
Pollen is an important adaptation for plants in the terrestrial environment because it allows for efficient reproduction without the need for water. This enables plants to disperse their genetic material over greater distances and increase genetic diversity. Pollen also protects the male gametes from desiccation and other environmental stressors.
What is name of the smallest unit of metric length?
The smallest unit of metric length is the millimeter. It is equivalent to one-thousandth of a meter.
Does water stay colder longer with more water in the cup?
Not necessarily. The rate of temperature change of water depends on the surrounding environment (like room temperature) and the material of the cup. However, a larger volume of water typically takes longer to heat up or cool down compared to a smaller volume of water, so it may stay colder longer in that sense.
What material should the clapper of the bell be made out of?
The clapper of a bell is typically made of metal, such as brass or bronze, to produce a clear and resonant sound when striking the bell. These materials are durable and can withstand repeated use without wearing down quickly.
Sunscreen is generally either primarily water or alcohol, sometimes found under inactive ingredients. If it's water you're probably fine but if alcohol it's potentially flammable considering primarily could mean over 50% alcohol.
Although alcohol doesn't necessarily mean it's flammable, could have a flame-retardant ingredient and the same goes for water but if it's mostly water it is hard to imagine a flammable mixture being purposefully made and tested.
Which clothing material retains more heat?
Wool retains more heat compared to cotton. Wool fibers are naturally insulating and have the ability to trap heat close to the body, making it a warmer fabric choice for cold weather. Additionally, wool can also absorb moisture without losing its insulating properties.
Why does spray starch stick to the iron?
If spray starch sticks to your iron it could simply be that you haven't shaken the can sufficiently.
Otherwise, it's probably that the bottom of your iron needs cleaning: wipe it over with a clean, damp cloth while the iron is cold, checking for any sticky parts. Then you can go over it while the iron is warm.
Don't use any abrasive cleaning pads (even plastic) or abrasive cleaners (liquid or powder).
It could possibly be that the iron has been cleaned incorrectly and the base is damaged - it could be pitted from abrasive cleaners, though you mightn't be able to see this you'll still feel it when you run your fingers over it. If this has happened, you'll need to buy a new iron. Get the cheapest: there isn't much difference, an iron is an iron, no matter what they say it does.
You can buy iron-cleaning preparations from the supermarked; check these out, one might help.
Once your iron is working normally, or you have a new iron, follow the use and care instructions very, very carefully. Don't use tap water in the iron.