0
Range Rover
Produced by UK-based Land Rover, Range Rover is a 4x4 sport utility vehicle owned by Tata Motors in India. Now in its third generation, the first Range Rover was introduced in 1970.
1,070 Questions
How many gallons does the gas tank in the 2003 Land-Rover Range-Rover hold?
The gas tank on the 2003 Land-Rover Range-Rover holds 26.4 gal..
What hand thread is the fan on a l322 range rover v8?
Land Rover 32mm threaded fans are Left Hand threads, the 36mm threaded fans (which I think you have) are normal/ right hand threads.
What is the gross vehicle weight of the 2005 Land-Rover Range-Rover?
The gross weight of the 2005 Land-Rover Range-Rover is 6724 lbs..
Where is the fuse panel on a 2003 range rover?
In a snap panel in the glove box just under the CD multichanger.
What is the gross vehicle weight of the 2013 Land-Rover Range-Rover-Sport?
The gross weight of the 2013 Land-Rover Range-Rover-Sport is 6768 lbs..
Coil pack firing order on a 1999 range rover 4.6?
starting from the top left going counter clockwise 6174 on the left coil pack and 8532 on the right coil
What tire presure should i have in 275 40 20 range rover thanks?
The tyre pressure that you should have in 275 40 20 Range Rover is 28 to 30 PSI.
What is the name of the song in the Land Rover advert?
The song is called "going home" and the guy who sang it is called Jon Allen (he has a my space.com page and a website with all of his music on)
How do you change a headlight in a 2003 range rover?
Hello, it's a pretty easy process that should only take about thirty minutes to complete.
You will need a phillip screwdriver, 8mm and 10mm wrench/socket.
With the hood up, remove the three phillip screws that holds the grille to the vehicle. Remove the two 10mm bolts which hold the plastic clips attached to the top of the headlight assembly. Remove the plastic cover from around the headlight wiper arm and remove the 8mm nut, then pull the wiper arm off the stem.
There are two phillip screws that hold the headlight, they can be access from the passenger side of the vehicle between the radiator/airbreather. The other can be accessed by simply removing the side marker/turn light from the headlight assembly.
Now you are ready to remove the headlight, it is wedged into the opening pretty sug, but will come out with a little patience.
Install in reverse order.....good luck.
How do you set a range rover in neutral when its off?
You must have the brake pedal depressed and the key turned to position 1 to release the "shift interlocking mechanism".
Where do you add transmission fluid to a range rover?
The automatic P38's don't have a dip tube.
It needs to be done underneath the vehicle where there are separate drain and fill plugs.
How do you turn on headlight wipers on a 2001 Range Rover?
Headlight wash wipe normally works when the headlights are on and you press the screenwash button
What does the warning light on range rover sport mean car with arrows up and down both sides on top?
This is the "EAS in motion" indicator. Signifying that system is adjusting airspring pressur to raise or lower the vehicle to the selected height. The system will automatically engage at certain speeds (to lower the center of gravity) or system failure will result in depressurizing the system and lowering to "Load height". The indicator light doubles as a trouble light and in case of failure of or within the system will stay illuminated until either reset by Rover testbook or the system check automatically clears the fault as corrected at startup. Your owners manual will provide additional information specific to your vehicle, see "EAS" in the index.
What is the firing order of a 03 range rover hse?
The 2003 4.4 Liter V8 Rand Rover firing order is 1-5-4-8-6-3-7-2
Click the link:
Where can one find a Range Rover Sport for sale?
A Range Rover Sport can be bought from a variety of different locations. You can try your local Range Rover dealer if you live in the UK or a specialist SUV or 4x4 dealership.
Where is the airbag module for the 2003 freelander?
"It could be in a number of different places. It could be underneath the Center console, maybe a little toards underneath the FM stereo, or sometimes either under the driver's or passenger's seat. If you want to replace it, that's fine, however, that will be ALOT more costly. I had my original SRS module sent in for a reset. I just googled a company called www.myairbags.com and they reset mine for $55 and shipped it back to me free of charge, I hooked it up and worked fine for me.
*Disconnect battery if you are working with the Airbag Module, if its powered and it feels movement, It could trigger the Airbags to blow."
How do you reset brake lights on for 2003 land rover range rover?
THIS VEHICLE THROWS A CODE WHEN ELECTRONIC WEAR SENSOR HITS ROTOR, CAUSING MESSAGE "CHECK BRAKE LINING", AND BRAKE LIGHT TO COME ON. THIS CODE MUST BE CLEARED IN VEHICLES COMPUTER BY OBD II OR EQUIV.
How to convert the centre rear seatbelt from a lap belt to a 3 point belt in a mk4 golf gti?
Securon have a centre rear seat belt - lap and diagonal - on their site. It is not easy to find and appears to be a special order. The address is :- http://www.securon.co.uk/other/seat_belts_centre.htm
What is the gross vehicle weight of the 2008 Land-Rover Range-Rover-Sport?
The gross weight of the 2008 Land-Rover Range-Rover-Sport is 6769 lbs..
How much does a range rover classic car alternator weigh?
I just weighed a Range Rover Part # YLE10100 100 Amp 12 Volt Alternator and it weighs 13.90 lbs.
How do change the oil filter in a 2004 range rover?
Installation Notes:
- You will need a rare 36mm socket to loosen and remove your oil filter housing (see part # W136).
- Raise vehicle to access the under side of the engine. Support vehicle safely - vehicle ramps or lift recommended.
- Find the drain plug on the engine. It is located on the right side of the sump, close to two oil cooler lines.
- Position a suitable oil drain container under the sump.
- Using a 17mm box wrench, remove the drain plug, allowing oil to drain. Discard the copper seal washer (a new washer is included in our Oil Filter Kit # LPW000010)
- Lower the vehicle. Locate the oil filter housing in the left front of the engine compartment. It is near the left side of the radiator.
- Using a 36mm socket (our part # W136), remove the oil filter cap. Discard the 'O' ring.
- Remove and discard filter element.
- Fit new filter element large hole to the bottom
- Install new 'O'-ring on cap and lube with some clean oil. Install cap and tighten to 18 foot-pounds torque.
- Raise vehicle and refit the drain plug with a new sealing ring. Tighten to 17 foot-pounds torque.
- Lower vehicle and fill with 9 quarts of 5W-30 oil. Run engine until oil lamp is turns off. Stop engine check oil level.
How do you tell a 5 speed rover gearbox from a 4 speed rover gearbox?
get gearbox number off gear box and look it up online.other than that try counting the different positions of gears
