Refrigerators

Crisper drawer has high humidity for green leafy vegetables and things that wilt, it's vents are close to trap moisture. Fresh drawer has lower humidity for fresh fruits and vegtables that hve skins and rot, it's vents are open to allow gases from fruits to escape.

your momma is it

jk jk

it is a fan that reloeases cold air in the refrigerator that keeps the food cold and good enough to eat

I disagree with Alliesmith.00.

The room will warm up.The fridge with the door left open will run pretty much continuously to try to cool the inside. Our fridge doesn't know the door is open, so it keeps running. The thermostat inside never senses that the inside has cooled, so it tells the compressor to stay on. The room will be cooled by the fridge, but remember that the compressor dumps heat out into the room all the while that it's running. And because the fridge is not 100% efficient, there will be more heat generated than there will be cooling. The result? The room will eventually warm up.

A2 -I would disagree partially with the above answer. 1) Efficiency is a term not really used for refrigerators. The term coefficient of performance is used because it can be and usually is greater than one (or greater than 100% in other words) and equals the heat removed from the inside of the fridge divided by the work input. 2) Now, if a perfect fridge was running on a Carnot cycle (no friction in the parts and other criteria) that gives the most cooling for the least amount of work, the room would still heat up as governed by the first law of thermodynamics. W=Heat from the condenser - heat from the evaporator or W+QL=QH. In this case all the terms are considered to be positive numbers. Clearly QH>QL which means the room is getting warmer. Probably the easiest was to understand this is that work is going into the insulated room which means the overall energy and therefore temperature is going up.

A3 - No, leaving the door of a refrigerator open will not cool a room, but will actually make the room hotter. A refrigerator cools its own interior by pumping heat to the heat exchange coils in the back (some models do not have exposed heat exchange coils, but the sides or back of the refrigerator have coils just underneath them, and they get hot). Those heat exchange coils pump heat into the room. Since the process is not 100% efficient, the amount of heat produced includes a certain amount of waste heat. As a result, pumping heat from one part of the room to another part of the room results in a net increase in heat.

You should give it away, or xcel will give you $50.

It is a safety issue. Food needs to be taken care of and stored at certain temperatures to prevent the growth of bacteria in the food. The way to be sure that this is happening is to take readings on a regular basis.

The refrigerant pressures are dependent on the type of refrigerant.

freon and oil

1.It can enters to the compressor through suction line and can damages the parts of the compressor.2.it can carry out

Put the bottle in ice.

Depends on condition and if it works or not. It is worth what someone will pay and that is not being smart that is just a fact.

Probably 2004

The ice maker is typically placed at the top of the refrigerator to utilize the colder air that naturally rises within the appliance. This positioning helps the ice maker operate more efficiently, as it can produce ice more quickly in a cooler environment. Additionally, placing it at the top allows for easier access and visibility, making it convenient for users to retrieve ice without having to bend down.

a rocky texture so delightfully orgasmic..

trash it

That varies widely with make, model, and especially ambient temperatures. But look at it this way: If you notice the compressor kick in once in a while, all is well. When you become aware that it is kicking in very frequently, the refrigerator is on it's last legs.

no

yes

maybe

yes, no, maybe so

I DON'T KNOW

Sub-Zero Refrigerators can be purchased online from Subzero-Wolf, Appliances online and Winning Appliances. One can also check online at Amazon, eBay and Overstock for deals and discounts.

It depends on the fridge. Newer fridges are generally more efficient, so would use less electricity, although size is a definite factor.

There should be sufficient information on the fridge to determine watts, though you may have to calculate. Watts = amps x volts. Volts = 120.

I'd use 120 to avoid underestimating.

In any case, running a fridge only for beer is an avoidable cost unless you make better use of it. Replacing an old fridge and a separate freezer with a newer'' more efficient fridge with useable freezer space probably uses less electricity than 2 older appliances.

Fully automatic door gasket welding machine, It is half-automated double-edge welding machine, which operation process is as follows: first, the strip was inserted the welding die by manual, then push the double-button, the machine run auto cycle, including: heating device moving up - heating - the heating device return - vacuuming - the latitude die close - thimble inserting into strip - inside cooling - outside cooling - trimming - longitude die open - push out the strip with mandril, last, unloading the strip by manual.<br /><br /><br />The characteristic of this welding machine is as follows: Good flatness welding surface and reliable strength of welding joint, automatic trimming, reliable quality, less work cycle time and high finished-product rate.<br /><br /><br />Qingdao JINGAN Machinery Equipment Manufacturing Limited Company

You get a new one.

mafe- makdeons

Fridge a derivative of Refrigerator, (icebox)

it doesn't its a reaction of the cold air in your freezer hitting the warmer air of your house

When wiring a house, GFI plugs are strategically placed in areas that can be tripped by water. For example: in bathrooms, in garages, etc. There are certain areas that do not require GFI plugs. A refrigerator is one device that is usually on its own breaker and does not require a GFI plug. My recommendation is to locate where the refrigerator is. If it is in the house remove it and replace it with a non GFI plug.