Savage Arms and J. Stevens

A good scope for a Savage 220, which is a dedicated slug gun, would be one that balances durability and clarity, ideally in the 2-7x or 3-9x magnification range. A quality shotgun scope, such as the Nikon ProStaff, Leupold VX-Freedom, or Vortex Crossfire II, would provide excellent light transmission and ruggedness for various hunting conditions. Look for features like a waterproof and fog-proof design, as well as a reticle that suits your shooting style for improved accuracy at different ranges.

To determine if your Model 170 Savage is an A, B, or C series, check the serial number located on the receiver. The A series typically has serial numbers starting with "A," while the B series starts with "B," and the C series with "C." Additionally, you can refer to the specific features of each series, such as stock design and barrel length, which may vary. For the most accurate identification, consult a Savage Arms reference guide or contact a firearms expert.

The Springfield Model 410 18E is a shotgun manufactured by Springfield Armory, likely produced in the mid-20th century. Its value can vary significantly based on factors such as condition, rarity, and demand among collectors, typically ranging from a few hundred to over a thousand dollars. To determine its exact age and value, it’s advisable to consult a firearms expert or appraiser, as well as reference specific serial numbers and market trends.

The value of a .410 and a .22 over and under shotgun can vary widely based on factors such as brand, condition, age, and specific model features. Generally, a new .410 over and under might range from $1,000 to $3,000, while a .22 over and under can typically be valued between $500 and $2,500. Vintage or high-end models can fetch higher prices. For an accurate appraisal, it's best to consult a firearms expert or check recent sales for similar models.

To mount a rifle scope on a Savage Model 99 in .250-3000, first, ensure you have the appropriate scope rings and bases that fit the rifle's specific model. Begin by securely attaching the bases to the receiver using the provided screws, ensuring they are properly aligned. Next, place the scope in the rings and adjust it for eye relief and level, then tighten the ring screws evenly to secure the scope. Finally, check the alignment and make any necessary adjustments before heading to the range for zeroing.

To determine the value of a Simonis 12 gauge double barrel shotgun with fine Damascus barrels, you should start by researching recent sales of similar firearms in online auction sites, gun shows, and collector forums. Factors such as the shotgun's condition, age, originality, and any unique features will significantly influence its value. Consulting a professional appraiser or a reputable firearms dealer can also provide a more accurate assessment. Lastly, reviewing collector guides or price books specifically for antique firearms may offer additional insights into its worth.

To disassemble a Stevens Arms 121, first ensure the firearm is unloaded and the safety is engaged. Remove the barrel by loosening the takedown screw located on the underside of the receiver. Then, carefully slide the barrel off the receiver. Finally, remove the trigger assembly by taking out the screws that secure it to the stock. Always consult the manufacturer's manual for specific guidance and safety precautions.

You can find information about a Universal Double-Wing Model 2016 12 gauge shotgun through online firearm databases, gun enthusiast forums, and websites like GunBroker or ArmsList. Additionally, manufacturer websites or user manuals may provide specifications and details. Local gun shops or shooting ranges may also have knowledgeable staff who can assist with specific inquiries about this model.

Yes, you can shoot slugs in a Stevens 58D 20 gauge shotgun, provided that the shotgun is in good condition and you are using the appropriate type of slug. It's important to ensure the choke is compatible; a cylinder or improved cylinder choke is ideal for shooting slugs. Always check the manufacturer's recommendations and consult with a knowledgeable gunsmith if you're unsure.

The model 9478 typically takes 12-gauge shotgun shells. It is designed to accommodate standard 2 ¾-inch and 3-inch shells, making it suitable for various shooting applications. Always refer to the manufacturer's specifications for the most accurate information regarding shell compatibility.

Yes, you can still get parts for the model 6400, as many manufacturers continue to support older models with replacement parts. It's advisable to check with the manufacturer's official website or contact their customer service for availability. Additionally, third-party retailers and online marketplaces may also have parts available. Always ensure compatibility with your specific model when purchasing.

Yes, Stevens did produce a model 248A, which is a bolt-action shotgun in 20 gauge. It features a three-round magazine that can be fed with a clip. This model was part of Stevens' line of shotguns designed for hunters and sport shooters.

To disassemble a Stevens 22 pump rifle, first ensure the firearm is unloaded and pointed in a safe direction. Remove the forend by unscrewing the forend screw, then slide the forend forward off the magazine tube. Next, take out the action by removing the action screws, and then gently pull the bolt and carrier out of the receiver. Finally, separate the barrel from the receiver by loosening and removing the barrel nut if applicable. Always refer to a specific manual for detailed instructions and safety precautions.

The J. Stevens 106 shotgun was produced primarily in the early to mid-20th century, with many models manufactured between the 1930s and 1950s. The age of a specific shotgun can vary significantly based on its production year. In terms of value, a J. Stevens 106 typically ranges from $100 to $300, depending on its condition, rarity, and any historical significance. For a precise valuation, it's best to consult a firearms expert or appraiser.

The value of a Stevens 311A 12 gauge shotgun typically ranges from $300 to $800, depending on its condition, age, and specific features. Factors such as wood quality, barrel condition, and any modifications can also impact its market value. For a precise appraisal, it's best to consult a firearms expert or refer to recent sales data for similar models.

The SAKABA model 355 is a shotgun manufactured by the Sakaba Company in Japan. Parts for this model can typically be found through specialty gun shops, online retailers that focus on vintage or hard-to-find firearms, and forums or communities dedicated to shotgun enthusiasts. Additionally, contacting the manufacturer or checking with gunsmiths who specialize in older firearms may yield parts or resources for repairs.

The value of a J. Stevens 1864 16 gauge shotgun can vary significantly based on its condition, rarity, and historical significance. Typically, prices range from a few hundred to over a thousand dollars, with well-preserved examples or those with unique features fetching higher amounts. It's advisable to consult a firearms appraisal expert or check recent auction results for a more precise valuation.

The value of a Savage Arms Model 18C can vary based on its condition, features, and the current market demand. Generally, prices can range from around $200 to $500 for used models. Collectibility and rarity can also impact value, so it's advisable to consult recent sales or appraisals for a more accurate estimate. Always consider factors like the firearm's condition and any modifications when determining its worth.

The value of a 20 gauge Savage Fox Model B double barrel shotgun typically ranges from $300 to $800, depending on its condition, age, and any unique features. Factors such as original finishes, the presence of engraving, and whether it comes with original packaging can also influence its market price. For a more accurate valuation, consulting a firearms appraiser or checking recent sales of similar models is advisable.

The value of a 12 gauge American Arms double barrel shotgun can vary significantly based on factors such as its age, condition, and any unique features it may have. Generally, prices can range from a few hundred to over a thousand dollars. For a more precise valuation, it's best to consult recent sales data or seek an appraisal from a qualified firearms expert or dealer.

The value of a Savage 516 Striker can vary based on its condition, age, and any modifications made to it. Generally, prices for used models range from $300 to $600. To get an accurate assessment, it's best to check recent sales on platforms like GunBroker or consult local firearms dealers. Always consider factors like demand and regional pricing trends.

The Springfield Model 15 rifle was produced in various iterations from 1903 until the early 1940s. Therefore, depending on the specific model and year of manufacture, a Springfield Model 15 could be anywhere from approximately 80 to over 120 years old as of 2023.

To find a regulator for a super flame oil heater model 99, check the manufacturer's website for replacement parts or contact their customer service for assistance. You can also explore local HVAC supply stores or online retailers specializing in heating equipment. Additionally, platforms like eBay or Amazon may have listings for compatible parts. If you're unsure, consulting a professional technician could help you locate the right regulator.

To remove the firing spring from a bolt action Stevens 84C, first ensure the firearm is unloaded and safe to handle. Then, disassemble the bolt by removing the retaining pin or screw that holds the firing pin in place, which will allow you to access the firing spring. Carefully pull out the firing pin and spring, taking care to note how they are assembled for reinstallation. Always consult the manufacturer's instructions or a gunsmith if you’re unsure about the process.

Repairing the firing pins on a Stevens 311C involves disassembling the shotgun, which includes removing the forearm and barrel from the receiver. Next, you need to access the firing pin assembly by taking out the trigger plate and its associated components. Inspect the firing pins for wear or damage, replacing them if necessary, and ensure proper alignment and function before reassembling the shotgun. Always refer to a detailed service manual for specific steps and safety precautions.