0
Springfield Firearms
Firearms manufactured by Illinois-based Springfield Armory Inc include a wide variety of rifles, pistols and clones of popular models such as the Beretta and M1. Most of the pistols manufactured by Springfield are designed for use by law enforcers.
1,790 Questions
How much could you get for a Sears and Roebuck model 73 cal 30-06 springfield rifle?
100-400 USD depending on condition.
What year did they make the springfield 840 3030?
They made the springfeild (rifle/sniperrifle) in sprigfeild mass. for future WWII
You have double barrel 12 gauge sam Holt arms co shotgun What is it worth and What is its history?
its an old gun from sears. inexpensive back then. worth about $125 bucks.
What is the difference in 38 special and 38 smith and Wesson?
Overall length
The 38 special is a stronger cartridge. If you have a .38 Special revolver it can still shoot a .38 S&W but not the other way around.
When was the Springfield model 944 made?
According to the Blue Book, these were manufactured from 1936 to 1942.
How can you tell if your M1 Garand barrel is shot out or leaded?
Look at the rifling in a good light. If it seems washed out or severely pitted, it may be "shot out". If the grooves have buildup that won't clean out easily, it may require that lead be removed. This should only be a problem if you have been shooting cast bullets (not jacketed).
Possibly, check you ejector spring. It may be seating the shell wrong.
How do i register a privately bought pistol in PA?
Record the make, model, and serial number. Leave the gun at home. Go to your local police station and ask them how the gun should be registered to you. Give them the information. They will likely tell you to bring in the gun. Ask them what condition the gun should be in for you to transport it to the station (locked in case, disassembled, etc). Follow their instructions. You will likely be ok and not get arrested. No guarantees. Some Pa jurisdictions have ambitious DA's.
What is the value of a springfield 30-06 rifle?
- WHAT IS MY GUN WORTH?
- What is the condition of the metal? Bore,is it rusty, pitted, bluing,
- What is the Condition of the wood? Gouged,dents,cracks,splintered
- Are there any markings on the stock? P, SA/GHD, WRA/GHD, RIA, crossed cannon and belt,ect.
- Is it complete? functional?
- Has it been sporterized? cutdown, altered in anyway?
- Pictures help, boy do they help
- GUN VALUES VERY.
How do you assemble a 1911 A1 45 ACP?
Insert the barrel into the slide. On the barrel, behind where the recoil spring guide sits, you'll find a barrel link. Rotate that link up so it's perpendicular to the barrel. Insert the barrel bushing and rotate it clockwise until it stops. Then install the recoil spring guide. Being mindful of that link remaining perpendicular to the barrel, slip the frame onto the slide and pull it back until the takedown notch is aligned with the rectangular cutout on the frame, and you can see through the barrel link when looking through the slidestop hole. Install the slidestop pin through the slidestop hole and barrel link until it sits flush against the frame. Make sure the bushing is fully turned clockwise and install the spring and plug onto the recoil guide rod. compress the spring until you can maneuver the barrel bushing wrench over the bushing with the plug and spring under it. Compress the spring with the wrench while turning the bushing counterclockwise enough to lock the plug in place. Cycle the action to make sure you got it, and you're done!
What year is the Springfield savage arms company 22 short long or long rifle model 120 made?
I have one given to my father for his 8th birthday, which would make it prior to 1934. By the way, if you know where I can get a front sight for this gun, I'd appreciate it! Just reply to this post.
What is the value of springfield 03 a3?
- WHAT IS MY GUN WORTH?
- What is the condition of the metal? Bore,is it rusty, pitted, bluing,
- What is the Condition of the wood? Gouged,dents,cracks,splintered
- Are there any markings on the stock? P, SA/GHD, WRA/GHD, RIA, crossed cannon and belt,ect.
- Is it complete? functional?
- Has it been sporterized? cutdown, altered in anyway?
- Pictures help, boy do they help
- GUN VALUES VERY.
Where can you find the serial number on springfield 1903?
On the front receiver ring,behind the rear sight.
What is the value of a Savage Arms Model 842 222 rifle?
I have one that I purchased for 150.00 and most values I have seen have been in the 150.00 to 200.00 range depending on condition.
What year was Springfield Armory model m1a serial number 651645 produced?
The receiver was made in 1917. The barrel also has a date stamp. Additional info can be found at http://vishooter.home.att.net/m1903.HTML
What does a springfield trapdoor rifle weight?
A Springfield trapdoor weighs roughly ten pounds for the long gun version and nine pounds with the short Carbine version.
What is the value of a springfield armory model 1808 rifle?
That depends...
Is it still a flintlock or converted to percussion? Many were converted to percussion prior to or during the American Civil War.
Is the barrel the original length? Many were shortened when sold as surplus after the ACW.
What condition is it in? Are the barrel, lock, and/or other parts rusted/pitted?
The price can be as low as $200 for a parts gun upwards of $2000 for one in reasonably good condition. Pristine condition is rare and can cost, well, a lot!
There is an 1816 available at one site for just under $1000 but it's been converted to percussion, pitted from rust, and needs some TLC to preserve it better. It would be a good idea not to take this one out and shoot it.
