Volume

2πr(h+r)

Remember K H D | d c m (kilo, hecto, deka, (liter, meter, gram), deci, centi, milli). Milliliters are three places to the right of liters. So you have to move the decimal place three times to the right. You will get 2 L = 2000 mL.

Good question but you can't figure it out unless you know the density of the substance. Tons is a measure of mass/weight & cubic feet is a measure of volume.

Density is measured in mass per unit volume.

Remember K H D | d c m (kilo, hecto, deka, (liter, meter, gram), deci, centi, milli). These are the denominations you need to list when converting metric units. Liters are three places to the left of milliliters. So you have to take your measurement in milliliters and move the decimal place three times to the left (same as dividing by 1000).

In order to satisfy the stated conditions, the caps must be 28 + 2 + 2 = 32 mm in diameter. The area of a circle with a diameter of 32 mm = (pi)(32/2)2 = 8.0 X 102 square millimeters, to the justified number of significant digits.

There is not much to calculate here - 4 cm3 is the volume. The mass is irrelevant for this problem.

There is not much to calculate here - 4 cm3 is the volume. The mass is irrelevant for this problem.

There is not much to calculate here - 4 cm3 is the volume. The mass is irrelevant for this problem.

There is not much to calculate here - 4 cm3 is the volume. The mass is irrelevant for this problem.

.1 GPS

10000 Imperial gallons = 1605 cu ft (to 4 sig fig)

between 165 cubic metres and 210 cubic metres per year.

48 cubic feet.

Remember K H D | d c m. Litres is three places to the left of millilitres. So you have to move the decimal place three times to the left. So in this case the answer is 0.404 litres.

The volume of this cylinder is approximately 3.41 cubic feet.

Quart means quarter gallon, so you divide the number of quarts by 4.

17 feet x 13 feet x 11 feet = 2,431 cubic ft

One cubic foot is 1,728 cubic inches. Therefore, 26 cubic feet = 26 x 1,728 = 44,928 cubic inches.

This question cannot be answered sensibly. A cubic foot is a measure of volume, with dimensions [L3]. An area is two-dimensional, with dimensions [L2]. The two measure different things and basic dimensional analysis teaches that you cannot convert between measures with different dimensions such as these without additional information.

19

There are 4 quarts in a gallon. Therefore, 16 gallons is equal to 16 x 4 = 64 quarts.

In one cubic centimere(cc)

It would have 1×10^(-3)

In one cubic meters (m^3)

1square meter

It will go on and on and on....

1,200 board feet.

0.128 Liters. just move the decimal three places to the left.

3 ft 2 equals how many in2

The abbreviation for cubic meter is m3.

Volume of a regular solid like you describe is

base area x height

In this case it is 9 x 18 cubic inches. Do the multiplication and you have your answer.

There are no feet in any cubic feet. "Feet" is a unit of length or distance, "cubic feet"

is a unit of volume. If length units and volume units could be converted to each other,

you'd be able to figure out how many gallons tall you are, or how many yards of gas

you put in your car yesterday.