Volume

1000 cm3 = 1 liter
1/1000th (1cc=1ml)

There are 2.54 centimeters in an inch, so 2.54 X 2.54 X 2.54 = 16.387064 Cubic Centimeters in ONE Cubic Inch. So divide 208 By 16.387064 and that gives you 12.692938771704315062173431433477 cubic centimeters or approx 13. There are 2.54 centimeters in an inch, so 2.54 X 2.54 X 2.54 = 16.387064 Cubic Centimeters in ONE Cubic Inch. So divide 208 By 16.387064 and that gives you 12.692938771704315062173431433477 cubic centimeters or approx 13.

Lets start by making the question a bit simpler, we have two units both with per second in them, so we can get rid of that bit. We are now left with: How do you conver 5.620 cubic metres into cubic feet? For now lets ignore that silly number at the front and convert a cubic metre into cubic feet. 1m = 3.28084 ft But we are talking cubes here so we need to cube 3.28: 1m^3 = 35.31467 ft^3 Then we can put back that 5.620 5.620 * 1m^3 = 5.620 * 35.31467 ft^3 = 198.5 ft^3 Then we need to put that per second bit back in: 198.5 cubic feet per second.

There are 12 inches in one foot. Therefore, 6 feet 2 inches is equal to 6 + (2/12) = 6.16 recurring (that is, 6.16666...) feet.

20 ounces makes 0.15625 of a gallon.

One gallon makes 20 ounces 6.4 times.

1,070 cubic inches is 0.6192 cubic feet.

There are 1000 millilitres in one litre. Therefore, 8.36 litres is equal to 8.36 x 1000 = 8360 millilitres. 
 

0.032 liters equal 32 milliliters.

Remember K H D | d c m (kilo, hecto, deka, (liter, meter, gram), deci, centi, milli). Milliliters are three places to the right of liters. So you have to move the decimal place three times to the right. You will get 359 L = 359,000 mL.

A 1,055 cubic foot cylinder can hold up to 7,890 US gallons or 6,570 Imperial gallons of liquid.

The formula for the volume of a cylinder is V = pi r2h, or the area of the circular base x the height. In this problem, we also have to make sure to use the same units for all the measurements, since the diameter is given in inches and the height is given in feet. Converting to inches, the radius, r, is 11 inches (half of 22 inches) and the height, h, is 276 inches (12 inches x 23 feet). 3.14 approximates pi. Plugging all these values into the formula gives: 3.14 x 112 x 276 = about 104,863.44 cubic inches. Since a cubic foot contains 12 x 12 x 12 = 1728 cubic inches, dividing 104,863.44 by 1728 gives about 60.68 cubic feet.

1155.2 cubic inches = 1155.2/(123) cubic feet = 0.6685 cu feet

91.82 ft3

32 if you don't spill any of it.

to find the area just multiply the length of two sides

in this case multiply 5x10 = 50 sq feet.

4.6 US fl oz is about 136.04mL

Each edge will be the cube root of 125 which is 5 cm

320, multiply length by with

This question does not make sense.

There are 0.001 liters in a milliliter and

1000 milliliters in a liter.

None.

A cubic metre is a measure of volume, whereas a foot is a measure of distance or length. The two measure different things and, according to the basic principles of dimensional analysis, conversion from one to the other is not valid.

22 acre-feet equates to 7,169,000 gallons of water.

"Cubic feet" is the description of a volume of space, like inside a bottle or a

warehouse. "Square feet" is the description of a surface area, like a wall

you're painting or a yard you're mowing.

They're different, and there's no way to compare them.

If you could talk about volume and area together and compare them, then

you'd be able to figure out how many acres of gas you put in your car last

month, or how many gallons of carpet you need for your bedroom floor.