Volume

2 ton elephant.

2 ton elephant.

2 ton elephant.

2 ton elephant.

1000 ml = 1 litre so 19000 ml = 19000/1000 = 19 litres. Simple!

1000 ml = 1 litre so 19000 ml = 19000/1000 = 19 litres. Simple!

1000 ml = 1 litre so 19000 ml = 19000/1000 = 19 litres. Simple!

1000 ml = 1 litre so 19000 ml = 19000/1000 = 19 litres. Simple!

None.

A foot is a measure of length or distance while a cubic yard is a measure of volume. The two measure different things and, according to basic principles of dimensional analysis, conversion from one to the other is not valid.

Depends on what you mean by "any apparatus". If no apparatuses are used then no measurements may be taken. You could submerse the sphere in liquid to find the level of displacement but then the water may be an apparatus. So, I would have to say the answer to your question as it is worded would be NO

11000ft squared. The equation is length times width for a rectangle.

14.62 cu yds

Tell me more about the number "6"? is that feet or inches?

A smaller unit is converting to a larger unit. Then, divide by 1,000 2,000 milliliters is equivalent to 2 liters.

None Cubic meters are a volume feet are a length

1 liter = 1000 milliliters 40 ml = 0.04 liters

1 cubic meter is 1.308 cubic yards.

You can't convert length to area.

There are 304.8 millimetres in one foot

Therefore there are (304.8)3 mm in one cubic foot

=28316846.59 mm in 1ft3

-->566336931.8mm in 20 ft3

Because you need the answer to be an integer, the answer is566336931 mm

=5.66336931*10^8 in standard form

You cannot.

A cubic foot is a measure of volume while a kilogram is a measure of mass. The two measure different things and it makes no sense to try to convert from one to the other. A simple mental experiment will demonstrate that: think of a cubic foor of air and the think of a cubic foot of lead. Which do you think will have the greater mass?

4 quarts in 1 gallon, do the math.

53,300 mL are in 53.3 liters.

Presuming you mean "centimetre", the answer is 1000.

The volume of an area 24 feet round and 45 inches deep is: 1,700 cubic feet.

6

You can't get to cubic meters from square meters without another dimension. If you have measured the floor of a box that is 2m x 5m then the floor is 10sqmeters. To get cubic meters, you'd measure the height as well and then multiply it by the floor's area.

square meters = Area = one dimension x another dimension

cubic meters = Volume = Area x another dimension (which is 3D)

Some say, that time is the only other dimension to consider which would give the 3D object the capability to move/morph, likely irrelevant for your question.

0.93 liters = 930 milliliters

480ft

1 litre = 1000 millilitres. You now have all the information required to answer the question.

27878400 sq ft