How many cubic feet are in 1 yard square?
A yard is a measure of length, while cubic feet is a measure of volume. To convert square yards to cubic feet, you would need to know the depth or height of the area. If the depth is 1 foot (standard for area measurements), then 1 square yard is equal to 27 cubic feet (3 feet x 3 feet x 3 feet).
How many gallons does 2007 corlla hold?
The 2007 Toyota Corolla holds about 38 HWY (MPG) and about 30 CITY (MPG)
How many cubic meters in a dump truck?
Approximately 15 to 20 cubic meters.
Not all 3 ton trucks will be the same size (have the ability to carry the exact same amount/volume of cargo), but one example would be:
Cargo body size (mm) = 5400×2298×400
Now, this would give you 4.96 cubic meters, but the 400mm measurement is just the height of the side of the cargo bay area ... in fact, cargo could be stacked probably 4 times that height, giving an effective cargo size/volume of 19.85 cubic meters.
How many milliliters are in 88 microliters?
A microlitre is one millionth of a litre.
A millilitre is one thousandth of a litre.
Therefore there are one thousand microliltres in on millilitre.
So 88μL is 0.088mL.
How many barrels of water to a cubic meter of water?
There are 117.347765 Liters in 1 US barrel volume. And there are 1,000 Liters in one cubic meter.
So there are
0.117347765 cubic meters per barrel
or
0.177347765 m3/ bl
by dividing across liters per barrel by liters per cubic meter.
Note that the UK measures of 'barrels' are slightly different than the US measure of a barrel used here. There are also slight differences between 'dry' and 'wet' barrel volume measures in some industries, for example the 'wet' volume of 1 barrel in the petroleum industry is 0.158987304 cubic meters per barrel, or 42 US gallons.
How many cubic feet is the moon?
The moon does not have a fixed volume in cubic feet because it is irregularly shaped and constantly changing due to factors like meteorite impacts. However, the moon's mean radius is about 1,079.6 miles, which is equivalent to approximately 5.25 x 10^10 cubic miles.
How many US gallons are in 1 metric ton of diesel?
1 US gallon = 3.78541178 liters.
Only (!) if you mean pure water, then 1000 litres of water weigh 1 metric tonne.
1000 litres of water are 264.172052357 US gallons that weigh 1 metric tonne.
Don't use this conversion for gasoline.
How many liters are in 348 milliliters?
Remember K H D | d c m (kilo, hecto, deka, (liter, meter, gram), deci, centi, milli). Liters are three places to the left of milliliters. So you have to move the decimal place three times to the left. You will get 382 mL = .382 L.
How much does one cubic foot of water weigh in lbs?
1 foot = 30.48 cm, cube this for volume in cu cm = 28316.85 cu cm,
weight at 1 g / cu cm (density of water) = 28316.85 grams = 28.31685 kgs,
then * 2.2046 ( kgs > pounds)
= 62.43 pounds
How many goldfish for 30 gallon aquarium?
One inch of goldfish per gallon of water is often recommended, so you could keep around 7-8 small goldfish in a 30 gallon aquarium. Keep in mind that as goldfish grow, they will require more space, so fewer fish may be ideal for the long term. It's always best to research the specific type of goldfish you have to ensure they have enough space to thrive.
How do you convert 35pounds per cubic food to kg per cubic meter?
Converting units is always done the same way . . . multiply the original quantity
by ' 1 ' several times.
In the following expression, the first term is the original quantity. The 2nd and 3rd
terms are each equal to ' 1 '.
(35 lb/ft3 ) x (kg/2.20462 lb) x (3.28084 ft/meter)3 = 560.647 kg/m3
What unit of measure in the metric system would you use to measure the volume of a soda container?
You would use liters (L) to measure the volume of a soda container in the metric system.
How much volume is in an imperial gallon?
One Imperial gallon = about 160 Imperial ounces or 153.7 US ounces.
How many cubic feet can a cement truck hold?
That depends on what size the concrete truck is. A 10-yard truck carries about 270 cubic feet when full. An 8 cubic yard truck carries about 216 cubic feet of concrete. (Or gravel, sand, etc)
How many liters of water exerts 1 psi in one hour?
1 psi (pound per square inch) is equivalent to 6.895 kPa (kilopascal). To determine the volume of water in liters that exerts 1 psi in one hour, the specific conditions of the system (such as the size of the container or the flow rate) need to be known. The volume of water can be calculated using the formula V = (P * A * t) / (ρ * g), where P is the pressure in pascals, A is the cross-sectional area, t is time in seconds, ρ is the density of water, and g is the acceleration due to gravity.
How many 339.3 cubic centimeters cans can fit into a 144 cubic meter room?
The first step is to covert cubic centimeters (cm3) to cubic meters (m3) so we are working with the same units. Since there are 1,000,000 cm3 per m3: 339.3/1,000,000 = 0.0003393
Next we just divide the volume of the room by the volume of each can: 144/0.0003393 = 424403.183
So you would need approximately 424,403 cans to fill a 144 m3 room.
How do you convert gram per cubic centimeters to kg per cubic meter explain?
You can multiply anything by 1 without changing it, a fraction with a numerator that's equal to its denominator equals 1, and common factors between a fraction's numerator and denominator cancel out. Also, whenever you see the word per in a word problem, think division.
You're converting a fraction with grams in the numerator and cubic centimeters in the denominator to one with kilograms in numerator and cubic meters in the denominator. Therefore, you want to multiply by a fraction with grams in the denominator (to cancel out the grams) and kilograms in the numerator, and you want the quantities to be equal so the fraction equals 1. You also want to multiply by a fraction with cubic centimeters in the numerator (to cancel out the cubic centimeters) and cubic meters in the numerator that equals 1....
(1 g/cm2) * (kg/1000g) * (10000 cm2/m2) = 10 kg/m2
Since the second and third fractions each equals 1,
1 g/cm2 = 10 kg/m2
How many Imperial gallons to a cubic meter of water?
There are 220 Imperial gallons to one cubic meter.
How many cubic meters is the moon?
"Pounds per cubic inch" is not an appropriate way to talk about density.
On the average, the moon's density is 3,346 kilograms of mass per cubic meter,
and that's the same as about 54.83 grams of mass per cubic inch.
The weight of that mass depends on where you take it.
If that 54.83 grams of mass were on the Earth, it would weigh about 0.121 pound,
or 1.93 ounces.
If it's on the surface of the moon, it weighs about 0.02 pound, or 0.32 ounce .
How much does a cubic foot of jelly weight?
I don't know, but one way to find out is to weigh a cubic inch of jelly then multiply that weight by 1728 (123).